Rockbox mail archive

• Next message: Gert Ouderkerken: "RE: Please test the new ATA code"
• Previous message: James Ockwell: "RE: Please test the new ATA code"
• In reply to: Owen Kalau: "Re: problems with new toshiba drive"
• Next in thread: Owen Kalau: "Re: problems with new toshiba drive"
• Reply: Owen Kalau: "Re: problems with new toshiba drive"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Owen Kalau wrote:
> in case it matters, just fyi: I believe that "power off drive" may have
> been set to "yes" before I powered it down and put it back together. if
> this is the problem, then could it be solved by 'fdisk /mbr' ? how else to
> clear the settings that are saved on the drive?

You don't have to. The power-off feature does not kick in until the disk spins down, thus not affecting boot.

The error message you see is produced by the Archos firmware in ROM, not Rockbox.

-- 
Björn

• Next message: Gert Ouderkerken: "RE: Please test the new ATA code"
• Previous message: James Ockwell: "RE: Please test the new ATA code"
• In reply to: Owen Kalau: "Re: problems with new toshiba drive"
• Next in thread: Owen Kalau: "Re: problems with new toshiba drive"
• Reply: Owen Kalau: "Re: problems with new toshiba drive"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]