Rockbox.org home
release
dev builds
extras
themes manual
wiki
device status forums
mailing lists
IRC bugs
patches
dev guide



Rockbox mail archive

Subject: Digital recording problem - distortion
From: Martin Borus (martin_at_borus.de)
Date: 2003-02-12


Hi,

I had problems today with a digital recording from a 48kHz
source. CVS 030209, JBR20GB

Somehow the jukebox has failed the adjust to the signal properly
which resulted in a distorted recording. The original digital signal was
OK, I looped that through while recording and it sounded OK on the
MD recorder.

This problem has occurred to me before (months ago), it might be
hardware related. My concern here is not that the recording failed,
but that, unlike with the original Archos firmware, I cannot check on
the signal while the recording is running: The peak meter is not
working and there is no signal on the analog/headphone output.
It would be very helpful if this could be changed.

The original recording is 600MB, it's distorted all the way.
I've put a small clip from the file at
http://www.syltlinks.de/rockbox/errorclip.mp3

Martin



Page was last modified "Jan 10 2012" The Rockbox Crew
aaa