Rockbox.org home
release
dev builds
extras
themes manual
wiki
device status forums
mailing lists
IRC bugs
patches
dev guide



Rockbox mail archive

Subject: RE: Cassette Adaptor Probs
From: joris.bass_at_planet.nl
Date: 2003-02-28


Hey,

I've had similar problems. The culprit was the suspension mechanism of the adapter's built-in tape head. It didn't move far enough into the adapter and the tape player concluded the tape had ended (pulled tight). So try to loosen the spring behind the tape head.

Good luck.

BTW I would prefer a line-in over a cassette adapter anytime. Running CD-player or not. The sound quality is MUCH better.

>Hi
>
>I'm new to the list though I'm reading the archives for some time now. I have
>to say that I really like RockBox very much, I never use the original firmware
>anymore.
>My problem is not directly RockBox related but maybe some of you have
>experienced the same problems. I use my JBR20 with a cassette adaptor
>in the car radio as this one doesn't have a line in. This usually works well.
>But sometimes the radio doesn't recognize the simulated ribbon, switches
>to the other side, switches back and finally spews out the adaptor. I already
>had a look inside the adaptor but didn't see anything I could improve.
>Has anybody had the same problems and knows a solution? Because
>a 20GB HD full of music really improves car driving :)
>
>(Sidenote: I also tried the line in from the CD-changer. This also works
>but I don't like having a running CD-player all the time I'm listening to
>the JBR).
>
>Thanks
>
>bye Fabi
>
>================================================================
>Deze e-mail is door E-mail VirusScanner van Planet Internet gecontroleerd op virussen.
>Op http://www.planet.nl/evs staat een verwijzing naar de actuele lijst waar op wordt gecontroleerd.
>
>



Page was last modified "Jan 10 2012" The Rockbox Crew
aaa