dev builds
themes manual
device status forums
mailing lists
IRC bugs
dev guide

Rockbox mail archive

Subject: RE: Record Timer Patch
From: Henri DAVID (
Date: 2003-03-05

and what about STOPING recording after some time ???


> -----Original Message-----
> From: []On
> Behalf Of Dave Jones
> Sent: 05 March 2003 00:40
> To:
> Subject: Record Timer Patch
> I've submitted a patch to sourceforge that adds record timer
> functionality to the latest AJBR CVS.
> Please bear with me as this is the first .C coding/patching/contributing
> I've done.
> The description on sourceforge:
> A patch that adds simple record timer functionality. The
> record timer (if set to active) stops a recording at a given
> interval and then starts recording again with a new file.
> This is useful for long term recordings. The break
> between recordings is only the time required to stop and
> restart the recording, on the order of 2-4 seconds.
> This adds two options to the "recording settings"
> menu, "Record Timer Active?" and "Record Timer
> Interval." These settings are stored in the hard disk
> settings area. Currently there are seven interval settings (5,
> 10, 15, and 30 minutes, 1, 2, and 4 hours.)
> If the record timer is set to active, the size of the recorded file is
> not shown on the recording screen, rather "Rec. Timer: [time]" is shown
> to indicate that the recording timer is active and the currently
> selected recording timer interval.

Page was last modified "Jan 10 2012" The Rockbox Crew