Rockbox.org home
release
dev builds
extras
themes manual
wiki
device status forums
mailing lists
IRC bugs
patches
dev guide



Rockbox mail archive

Subject: Re: PCMCIA USB 2.0 ARJB6000
From: Dirk (krafty808_at_hotmail.com)
Date: 2003-06-01


Hi Stephen,

Thanks first for your reaction, much appreciated :)

Indeed when I go to the device manager, the PCMCIA card is correctly
installed,
all drivers show that they are working properly. Further the eject icon is
indeed in the system tray.

I read though on http://www.everythingusb.com/usb2/faq.htm , the following;

"Do USB 1.1 cables work with USB 2.0 devices? Add Your Notes
Ideally, yes. USB 2.0 architecture uses the same cables and connectors as
USB 1.1 compliant products. Unforunately, only 3 out of 11 cables on the
market are certified as USB 1.1 compliant. You may run into the cables that
cause problems connecting high-speed peripherals. To avoid negative user
experience, most vendors include USB 2.0 compliant cables with their USB 2
PCI cards and peripherals."

Maybe I need a USB 2.0 cable and not the standard cable that came with the
Jukebox ?

Thanks again for your efforts

Dirk

"Stephen Ball" <rockbox_at_invisionfilemanager.com> wrote in message
news:001501c32839$51baf640$3976e150_at_Laptop...
> I know its possible because that's the setup I have, Laptop with PCMCIA
> USB 2 card
>
> Can you see if the PCMCIA card has installed correctly, i.e is the eject
> icon in the system tray
>
> ---------------
> Stephen Ball
> Invision Power Services
> http://www.invisionpower.com
>
> -----Original Message-----
> From: owner-rockbox_at_cool.haxx.se [mailto:owner-rockbox_at_cool.haxx.se] On
> Behalf Of Dirk
> Sent: 01 June 2003 11:08
> To: rockbox_at_cool.haxx.se
> Subject: PCMCIA USB 2.0 ARJB6000
>
> Hi All,
>
> This is my first time on the newsgroup, hi everyone ! :)
>
> I have a question;
>
> First some general info:
> * Laptop IBM Thinkpad 760XL (Pentium 166, 106MB internal memory)
> * ALI PCI to USB 2.0 Cardbus Host Adapter (PCMCIA)
> * OS = Windows 98SE
> * ARCHOS Jukebox 6000 with Rockbox 2.0 for player
> * latest USB driver installed of Archos on the laptop
>
> I'm trying to get the Jukebox connected, the PCMCIA USB controller
> itself
> is working, but when I connect my Jukebox to it, it won't see it, it
> doesn't
> come up with the message new hardware found in order to install the
> drivers.
>
> I did try it the other way around, by installing the driver first and
> then
> connect
> the Jukebox, but unfortunately no luck.
>
> Does anyone know what I'm doing wrong ? USB 2.0 does support USB 1.0
> and 1.1.
>
> I hope it's possible...
>
> Thanks for your reply in advance ;)
>
> Keep up the good work on the ROCKBOX, IT REALLY RULES !!
>
> Regs,
> Dirk
>
>
>
>
>
>

begin 666 small_blue_arrow.gif
M1TE&.#EA" `*`+,/`)_&[("SYJ_/[]_L^3"#UH^\Z<_B]5"6W!!PSR!YTN_U
M_'^RY4",V;_9\@!FS/___R'Y! $```\`+ `````(``H```0M\,DI%7/8)5/<
F"=FQ:(: .,SH(,) I!@"*.^X-2?3'1W&*(D,IO%0-(Z-P2,"`#L`
`
end



Page was last modified "Jan 10 2012" The Rockbox Crew
aaa