Rockbox mail archive
Subject: RE: Survey for Rockbox in Flash, please participate
From: Geordi Sinclair (g.sinclair_at_publitec.vnu.com)
I get with my ARCHOS Recoreder
Flash: M=BF D=D6"
From: idc-dragon_at_gmx.de [mailto:idc-dragon_at_gmx.de]
Sent: 19 May 2003 11:55
Subject: Survey for Rockbox in Flash, please participate
we're starting to work on the possibility to bring Rockbox into the Flash
ROM of the jukebox. Imagine booting in maybe 3 seconds!
Don't tell me it's dangerous. The box has a boot ROM, it seems to contain a
little monitor communicating over RS232. We may be able to use this to
code to program the box even if the flash is completely garbled. All this is
to be analyzed yet.
There are units with flash chips that could be programmed in-system, while
others can't (like mine, grr!).
I made some test code to find out, by reading the flash IDs. Since the
20030518 daily build this code is in. Please test yours, in the menu go to
(Keep Out!)" -> "View HW info". If the Flash entry lists hex bytes for
manufacturer and device, you're lucky. If it gives only question marks, it
to bring the flash into command mode, meaning either the chip would need a
12.5V programming voltage (like my SST37VF020) or you have some exotic flash
code is not prepared for.
The lucky guys are most likely to find "Flash: M=BF D=D6", which means
SST39VF020. I would be very interested in other values.
If you did the test, please post here or email me regardless of the result,
I'd like to get some meaningful statistics.
+++ GMX - Mail, Messaging & more http://www.gmx.net +++
Bitte lächeln! Fotogalerie online mit GMX ohne eigene Homepage!
Page was last modified "Jan 10 2012" The Rockbox Crew