From: Frank Incensed <frankincensed_at_hotmail.com>
Date: Fri, 26 Dec 2003 21:48:04 -0500

Thanks,
What type of batteries did you use, I will try that its a hd20 recorder


>From: Neon John <johngd_at_bellsouth.net>
>Reply-To: rockbox_at_cool.haxx.se
>To: rockbox_at_cool.haxx.se
>Subject: Re: HD register error
>Date: Fri, 26 Dec 2003 21:33:18 -0500
>
>On Fri, 26 Dec 2003 20:26:34 -0500, "Frank Incensed"
><frankincensed_at_hotmail.com> wrote:
>
> >well when i plug into dc power it does the same thing wouldnt that be the
> >same as replacing the batteries?
> >the msg on the the screen says
> >HD register error
> >SC1 (85) 227
> >SN1 (170) 0
> >SC2 (170) 18
> >SN2 (85) 211
>
>No. The wall wart cannot supply enough power to spin up the drive. The
>batteries have to help.
>
>I ran into this with my new Recorder last week. I left it on charge for a
>couple of hours and then started copying over the files from my other
>Recorder. I started getting a very occasional "delayed write failed" error
>from windoze. It finally dawned on me that the new recorder still
>contained
>the garbage factory batteries. I installed a set of good 2100 mah
>batteries
>and the problem was solved.
>
>I put the garbage batteries in my fast charger just to see what happened.
>Just like the same type batteries from my other recorder and from my Studio
>10, they got very hot very quickly and failed to take any charge. They
>lasted
>less than 5 minutes in my battery tester. Into the garbage they went, just
>like the other two sets.
>
>Anyway, the point is, if the HD cannot get enough power and the voltage
>drops
>to some threshold, then a wide variety of illogical error messages can
>result
>as the drive electronics effectively go into a dying quiver. Give it
>enough
>juice and all is well.
>
>John
>---
>John De Armond
>johngdDONTYOUDARE_at_bellsouth.net
>http://bellsouthpwp.net/j/o/johngd/
>Cleveland, Occupied TN

_________________________________________________________________
Have fun customizing MSN Messenger — learn how here!
http://www.msnmessenger-download.com/tracking/reach_customize
Received on 2003-12-27