dev builds
themes manual
device status forums
mailing lists
IRC bugs
dev guide

Rockbox mail archive

Subject: Re: (no subject)
From: Rocker (
Date: 2004-06-02

What Archos unit do you have?
----- Original Message -----
From: "Selamet" <>
To: <>
Sent: Tuesday, June 01, 2004 12:01 PM
Subject: (no subject)

Hello, I tryed your Instructions, but Archos doesn't talk and I haven't a
menu point that named "Voice" or some thing like that. If you can send me a
with the files for the .rockbox-directory? So I can directly extract this
files with the settings that I like?
Zitat anfang
-----Original Message-----
From: Rocker []
Sent: Tuesday, June 01, 2004 4:49 AM
To: Selamet
Subject: Rockbox talking

Hello, Just in case you are still having trouble here's a good script to
follow to get your unit talking.
To activate the talking menus on the Archos, you first need to
download the daily build of rockbox. This is not the stable version 2.2, but
a later build, and is available at
Make sure to download the build for your unit, whether Player,
Recorder, FM Recorder, or Recorder V2. Then install it as you would any
other version of rockbox. Extract the .zip file to the root directory of
your archos. You should now have a .rockbox directory in the root directory
of your unit. Make sure that you have a file called archos.mod file
(player), or ajbrec.ajz (recorders), in the root of your archos. This file
is the actual firmware file. The .rockbox directory contains plug-ins and
configuration information. Now download the language.voice file (note, when
I say to manipulate the language.voice file, I mean the specific voice for a
language. That is, the voice file for English is called english.voice, the
German voice is called deutsch.voice, etc.) from
The voice file is one of the .zip files in that directory. is the English AT&T voice Crystal speaking the prompts,
is the English Microsoft Mary voice speaking, and is a German
voice. Voices for French and other English voices are available from

The Crystal voice is natural but sometimes mispronounces things, the
Mary voice is robotic but has good pronunciation.
Make a langs directory (if such a directory doesn't exist already),
inside the .rockbox directory on your archos and put the language.voice file
into that. That is, the path to the language voice file should be
Assuming your archos is assigned drive letter J. Now disconnect your
archos as usual, turn it on, and hit menu. You should have talking menus.
Now, you'll need to get your directories and file numbers spoken or
There are three ways to get the directories talking. You can have
them announced by number (folder 1, folder 2, etc), have them spelled
audibly, (M U S I C), or have them announced through recorded clips. To have
them announced by number or spelled, simply change the setting in menu
/>general settings/> voice. There's an option called "voice directories".
You can set it to off, numbers, spell, on enter, or while hovering. The last
two options relate to voice clips, but the first three don't need voice
If you want your directory names spoken as words, rather than
spelled or given numbers, you need to know that rockbox doesn't have any TTS
capabilities. It wants to see a file called
in the folder. That _dirname file contains the name of the folder in
MP3 format. One of the rockbox programmers has released a script to create
these files automatically see
to get that script and
to get the lame executable which it requires. Install lame, copy
lame.exe and the mp3clipgen.vbs script you get from the first link above to
the same directory, then run the mp3clipgen.vbs script. You will be asked to
enter the folder where all your music is stored. Enter the path to your
jukebox (make sure it's connected). That is, if your jukebox is drive letter
J:, enter
and hit enter. The script should, in a few minutes, give you a
success message.
Disconnect the jukebox and reboot it as usual. You'll need to set
the voice directories option alluded to above to while hovering or on enter,
depending on whether you want your directories spoken when you enter them
with play or right arrow, or as you hover over them.
To get names or numbers spelled or spoken for your files, you need
only set the "voice files" option in the voice submenu of the general
settings submenu off the main menu to either spell or numbers. Your files,
as you go through them with the arrows, will either have their names spelled
or numbers spoken for them.

Zitat ende



Page was last modified "Jan 10 2012" The Rockbox Crew