> Matthias is using a 9+v charger which, according to the FAQ, gives him
> about
> 140mA current into the Archos. The problem is, this is only slightly more
> than is necessary just to run the AJR (and less than needed when the disk
> spins up). With a limit of 40% duty cycle (24/60), his charger is falling
> behind.

The Recorder hardware can measure both the cell voltage and the DC input
voltage, and could derive the charging current from that. Perhaps the duty
cycle should be a function of this?

Jörg

-- 
DSL Komplett von GMX +++ Supergünstig und stressfrei einsteigen!
AKTION "Kein Einrichtungspreis" nutzen: http://www.gmx.net/de/go/dsl
_______________________________________________
http://cool.haxx.se/mailman/listinfo/rockbox