dev builds
themes manual
device status forums
mailing lists
IRC bugs
dev guide

Rockbox mail archive

Subject: Re: flashing IRiver

Re: flashing IRiver

From: Rocker <>
Date: 2005-08-26

Success! Rockbox started up! Thanks a bunch man !

rocker's getting ready to rock!
----- Original Message -----
From: "Jonas H." <>
To: "Rockbox development" <>
Sent: Friday, August 26, 2005 9:27 AM
Subject: Re: flashing IRiver

> On Fri, Aug 26, 2005 at 09:14:32AM -0600, Rocker wrote:
>> "Step 4: Install it on the iriver
>> Just follow the normal Firmware Upgrade procedure. You should now have a
>> boot loader that tries to load Rockbox from disk when you start the
>> player."
>> *What is the normal firmware upgrade procedure for IRiver?
> First, the jukebox should be powered by the charger during the firmware
> upgrade. Follow these steps:
> Copy the patched file ihp_120.hex to the root of your player.
> Now disconnect the device and start op the player.
> Go into the menu (hold the joystick down for a few seconds).
> (Note that the menu will disappear after a 20 seconds of inactivity.)
> Go into the "General" menu (first item, so just press the joystick).
> Go to the "Firmware Upgrade" menu option (Press the joystick down 5
> times).
> Press the joystick.
> A dialog pops up asking you if you are sure - move the joystick to the
> right and press the joystick to confirm and the firmware upgrade begins.
> After a while, the player will turn off and the firmware upgrade will be
> complete.
>> What am I missing here? When I patched the firmware do I need to rename
>> the resulting file?
> No, the file should be named ihp_120.hex (or ihp_100.hex if you have a
> H110 or H115 - 10 and 15gb models).
> --
> Jonas H
> rasher(at)rasher(dot)dk
> -- Random .sigs suck
> _______________________________________________

Received on Fri Aug 26 18:12:47 2005

Page was last modified "Jan 10 2012" The Rockbox Crew