As far as I know, this should be fixed in the latest daily/CVS build.
Try updating again?

Jamie
On Wed, May 03, 2006 at 05:57:43PM +0200, Magnus Holmgren wrote:
> Rich De Steno wrote:
>
> >I bought a new Iriver H120 and followed the Rockbox installation
> >instructions on the web site. It worked well for one day, but since then,
> >Rockbox begins to load but then seems to hang up. The unit works fine when
> >I bypass Rockbox and use the regular Iriver firmware by holding down the
> >"rec" key when pushing "play". I tried a new daily build with the same
> >result. Here is what comes up on the display when I try to use Rockbox.
> >Any suggestions on correcting this problem are welcome:
> >[display]
> >Rockbox Bootloader Version 6 bat 4.09 ...
> >Loading Firmware
> >No File
> >(Root closed) (Root closed) 0:00/0:00
> >7K Bit No ID3
>
> Looks like you've encountered the resume on startup problem. Try reset your settings, by pressing rec right after seeing the
> battery message on the screen during startup.
>
> Magnus

-- 
James Teh
Email: jamie@jantrid.net
WWW: http://www.jantrid.net/jamie/
MSN Messenger: jamie@jantrid.net
Jabber: jteh@jabber.org
Yahoo: jcs_teh