From: Magnus Holmgren <lear_at_algonet.se>
Date: Wed, 03 May 2006 17:57:43 +0200

Rich De Steno wrote:

> I bought a new Iriver H120 and followed the Rockbox installation
> instructions on the web site. It worked well for one day, but since then,
> Rockbox begins to load but then seems to hang up. The unit works fine when
> I bypass Rockbox and use the regular Iriver firmware by holding down the
> "rec" key when pushing "play". I tried a new daily build with the same
> result. Here is what comes up on the display when I try to use Rockbox.
> Any suggestions on correcting this problem are welcome:
>
> [display]
>
> Rockbox Bootloader Version 6 bat 4.09 ...
> Loading Firmware
>
> No File
> (Root closed) (Root closed) 0:00/0:00
> 7K Bit No ID3

Looks like you've encountered the resume on startup problem. Try reset
your settings, by pressing rec right after seeing the battery message on
the screen during startup.

   Magnus
Received on 2006-05-03