|
Rockbox mail archiveSubject: Re: My IRiver will not talkRe: My IRiver will not talk
From: Glenn at home <GlennErvin_at_cableone.net>
Date: Wed, 13 Sep 2006 22:59:15 -0500 Hi Melissa, If I remember, you said that you downloaded the hex file, and patched it with the RockBox patch. Then the next step is to put the patched hex file onto the root, and then comes the flashing step. You need to enter the menus, with sighted assistance, or use the Blind flashing steps, which tells how many arrows to push. I can find it if you wish. But if you have sighted assistance, you enter the menus, right arrow once, and down arrow to "flash firmware" Then this will take a few minutes, and the player will shut itself off, and you will re-boot it all flashed. You should read the Blind flashing, if you haven't yet. HTH Glenn ----- Original Message ----- From: "Melissa Keys" <melkeys_at_hotmail.com> To: "Rockbox" <rockbox_at_cool.haxx.se> Sent: Wednesday, September 13, 2006 10:51 PM Subject: Re: My IRiver will not talk Thanks again. Your help is definitely appreciated. I will tell you what I did and you can tell me if that was really what I should have done, or if I missed a step. I did a firmware upgrade, but don't know if that is the same thing as flashing. I downloaded a daily build since the manual said that there was not yet a stable release of Rockbox for the Iriver. the name of the file I downloaded was rockbox-h300-20060911.zip I unzipped the contents of that folder to the root directory of my player. If I still need to flash it let me know. I thought that just patching the firmware and then upgrading it would do the trick. thanks again! Your suggestion was helpful. Melissa ----- Original Message ----- From: "Rocker" <rocker_at_shaw.ca> To: "Rockbox" <rockbox_at_cool.haxx.se> Sent: Wednesday, September 13, 2006 9:12 PM Subject: Re: My IRiver will not talk > Hi, > Mel, > > I have been following this thread and don't recall you stating that you > flashed the firmware? Have you done this from the Iriver after copying > the > patched file to the unit? Moreover, are you sure you downloaded the > correct > version of rockbox for the player? > > Cheers...Keith > ----- Original Message ----- > From: "Melissa Keys" <melkeys_at_hotmail.com> > To: "Rockbox" <rockbox_at_cool.haxx.se> > Sent: Wednesday, September 13, 2006 7:17 PM > Subject: Re: My IRiver will not talk > > > I think i've figured out that the Iriver firmware is loading rather than > the > rockbox. There is at least a 6 second pause after I push the on button > and > when I push the off button the player shuts down immediately rather than > letting the disk spin. Also, my mother told me that when it starts up the > screen says Iriver and then starts telling me how many folders and files > are > on the player. Hope this might clarify some things. Anymore suggestions > are greatly appreciated. The unit still won't talk. I have performed a > few resets and the player still behaves the same way. > > Melissa > ----- Original Message ----- > From: "Julia Aguilar" <list_at_julesflute.com> > To: "'Rockbox'" <rockbox_at_cool.haxx.se> > Sent: Wednesday, September 13, 2006 3:22 PM > Subject: RE: My IRiver will not talk > > >> Melissa, >> >> For some reason, with my H-340, I need to sometimes push the menu button >> twice a bit quickly for it to speak the menus. >> On the english.voice file, make sure you rename the voice that you've >> installed and put into your langs folder english.voice. IF you just put >> the >> voice in the langs folder, it won't talk. >> >> HTH, and call me if you have any more trouble. >> Julia >> >> >> > > Received on 2006-09-14 Page template was last modified "Tue Sep 7 00:00:02 2021" The Rockbox Crew -- Privacy Policy |