Rockbox.org home
release
dev builds
extras
themes manual
wiki
device status forums
mailing lists
IRC bugs
patches
dev guide



Rockbox mail archive

Subject: Re: My IRIVER H320 IS FIXED, STILL NEED HELP

Re: My IRIVER H320 IS FIXED, STILL NEED HELP

From: Glenn at home <GlennErvin_at_cableone.net>
Date: Sun, 5 Nov 2006 20:59:57 -0600

I don't know what happens if one presses the menu button on start-up.
It seems obvious that one would wait until it finishes booting before opening the menus.
Glenn
----- Original Message -----
From: Brent Harding
To: Glenn at home ; Rockbox
Sent: Sunday, November 05, 2006 8:44 PM
Subject: Re: My IRIVER H320 IS FIXED, STILL NEED HELP

I had to get to the file browser on my 120 before menus would speak. I figured this out by encoding 3 minutes of silence to a 64k mp3 file that I really thought I had to be playing something to get the menus, but after turning on the file speech, you need only be in the browser before you press menu. Pressing it from startup does nothing, at least on the 120.

  ----- Original Message -----
  From: Glenn at home
  To: Rockbox
  Sent: Saturday, November 04, 2006 6:33 PM
  Subject: Re: My IRIVER H320 IS FIXED, STILL NEED HELP

  Hi again Dan,
  I don't know if you tried the menus, but it will not talk until you open the menus.
  If you don't get it talking in the menus:
  Try pressing the reset button, I believe it is on the top left side of your unit, below the Mic.
  Also, you might have a sighted person go into the menus, and go into settings, and reset the unit to the rockbox defaults.
  HTH.
  Glenn
  ----- Original Message -----
  From: Dan Malone
  To: Rockbox
  Sent: Saturday, November 04, 2006 6:28 PM
  Subject: Re: My IRIVER H320 IS FIXED, STILL NEED HELP

  Hello again users.
  I forgot to add that we placed the
  english.voice in the langs directory.
  This should have been in the previous message.
  Dan

    ----- Original Message -----
    From: Dan Malone
    To: Rockbox
    Sent: Saturday, November 04, 2006 7:15 PM
    Subject: My IRIVER H320 IS FIXED, STILL NEED HELP

    Hello Rockbox users,
    I am totally blind.
    With help from my son, that's sighted, we followed the instructions, I beleive to the letter to load Rockbox on my Iriver H320.
    But, it doesn't come up talking.
    We used the patcher for the international .hex file:
    H300jp-v128.zip
    The patcher program said successful.
    And, he updated the firmware on the unit successfully as it shut itself off.
    I then extracted the folder and file from:
    rockbox-h300-20061103.zip
    We placed them on the root directory.
    We then unplugged the power and usb cords.
    When starting up, the boot screen says iriver.
    I have double checked the manuals and have glanced through the archives and I'm stumped.
    Anyone have an answer for me please?
    Thanks for any help, Dan
Received on 2006-11-06


Page was last modified "Jan 10 2012" The Rockbox Crew
aaa