Rockbox.org home
release
dev builds
extras
themes manual
wiki
device status forums
mailing lists
IRC bugs
patches
dev guide



Rockbox mail archive

Subject: Re: Voice building

Re: Voice building

From: Peter Herngaard <pethern_at_email.dk>
Date: Sun, 12 Nov 2006 00:11:31 +0100

It is said that you can do it from the Control Panel, but my own tested method uses the rate property from within the script.
I will send you a ZIP archive containing all necessary script files.

Best Wishes,
Peter Herngaard

----- Original Message -----
  From: Hamish Mackenzie
  To: Rockbox
  Sent: Saturday, November 11, 2006 11:56 PM
  Subject: Re: Voice building

  Hi again Peter so where would I have to adjust this rate? From within the script or is it from the speech properties of the control panel?

  Cheers

  Hamish
    ----- Original Message -----
    From: Peter Herngaard
    To: Rockbox
    Sent: Sunday, November 12, 2006 9:27 AM
    Subject: Re: Voice building

    Hello Hamish

    No, the rate adjustment in SAPI5 is slightly different but similar from the method used in SAPI4.

    In SAPI5 use the rate property to change the rate. I can't remember whether the rate adjust refer to the number of spoken words per minute.

    Best Wishes,
    Peter Herngaard

    ----- Original Message -----
      From: Hamish Mackenzie
      To: Rockbox
      Sent: Saturday, November 11, 2006 11:13 PM
      Subject: Re: Voice building

      Hi Peter

      Would inserting that line also work for a SAPI 5 voice such as scansoft lee and would the figure of 360 work for a scansoft voice or does it need to be adjusted and is the 360 a words per minute speed?

      Cheers

      Hamish
        ----- Original Message -----
        From: Peter Herngaard
        To: Rockbox
        Sent: Saturday, November 11, 2006 11:26 PM
        Subject: Re: Voice building

        Hello Grant

        From my own makevoices.vbs file

        ---
        MakeVoiceFileSAPI4 "english", "Reed", 10, "--cbr -B 16 --
        resample 12 --scale 0.6 -t -S --priority 0"

        ---

        In order to adjust speech rate insert the following line after BDone = false.

        ---
        oTTS.Speed = 360
        ---

        Best Wishes,
        Peter Herngaard

        ----- Original Message -----
          From: Grant Hardy
          To: 'Rockbox'
          Sent: Saturday, November 11, 2006 7:54 AM
          Subject: Voice building

          Hello,

           

          What is the optimal line to insert into the MakeVoices script for building a voicefile with the Reed voice, which is SAPI4? Thanks.
Received on 2006-11-12


Page was last modified "Jan 10 2012" The Rockbox Crew
aaa