Rockbox mail archive
Subject: Re: Help with Iaudio installation please
Re: Help with Iaudio installation please
I'm assuming you want Rockbox on your player. After you copy the .bin
file, you need to additionally download the daily build for X5. If you
plug your unit in with just the bootloader installed, the problem you
stated will happen, but you will still be able to read and write to the
drive with the USB connection. Once the folder .rockbox and the file
rockbox.iaudio files are copied, the device should spin up properly.
Any further questions you can contact me offlist.
Graham Roby wrote:
> I just got the Iaudio x5 l 30gb today.
> After charging the player, I installed the bootloader x5_fw_.bin in to
> the firmware folder as directed by the manual.
> I then disconnected from the pc and plugged in the charger. After a
> short while I then reconnected to the pc.
> For some reason now the hard drive won't spin up, it sounds like it
> tries to do so twice and remains in action for about five seconds
> spinning up, dying, trying to spin up again and finally stopping.
> There is a message that comes up saying audio and then it reverts to
> I'm assuming here that I'm still turning the machine on by sliding the
> button on the top right of the player forward and holding it there for
> a couple of seconds or so?
> Any help would be greatfully received.
> Kind regards
Received on 2006-11-21
Page was last modified "Jan 10 2012" The Rockbox Crew