dev builds
themes manual
device status forums
mailing lists
IRC bugs
dev guide

Rockbox mail archive

Subject: Re: Voice should be working fine now

Re: Voice should be working fine now

From: Timberwolf <>
Date: Mon, 27 Aug 2007 11:45:34 -0500


Is it possible for a blind user to instal cygwin, or do I need to have sited

----- Original Message -----
From: "Daniel Dalton" <>
To: "Rockbox" <>
Sent: Monday, August 20, 2007 5:23 PM
Subject: Re: Voice should be working fine now

> Hamish Mackenzie wrote:
>> Hi I used to build my own voices using the Real Speak Solo voices, which
>> are SAPI5, with the make voices vbr script and was wondering where I
>> could find some documentation on how I would go about this with the new
>> setup? I have looked on the web site for some sort of instructions but
>> cant seem to find anything new. I am using a first gen Nano if that
>> makes any difference in the instruction set.
> Have a look at:
> You will need to look for the heading
> "Using Linux or Cygwin" But you can read the whole page if you want.
> You will also need cygwin installed. And you need the rockbox packages.
> So you can find out how to install cygwin at:
> If you get this far you can probably add patches and compile rockbox.
> Hope this helps,
> --
> Daniel Dalton
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition. Version: 7.5.484 / Virus Database:
> 269.12.2/967 - Release Date: 22/08/2007 6:51 PM
Received on 2007-08-27

Page was last modified "Jan 10 2012" The Rockbox Crew