Rockbox.org home
release
dev builds
extras
themes manual
wiki
device status forums
mailing lists
IRC bugs
patches
dev guide



Rockbox mail archive

Subject: More info on H340 problem!

More info on H340 problem!

From: Grant Hardy <granthardy_at_telus.net>
Date: Sat, 6 Oct 2007 20:18:21 -0700

Hey gang, I found this info on MisticRiver. Supposedly there are others who
have had the problem of their H3xx thinking it is still connected in USB
mode when really it is not. Here is what the forum instructs me to do; it
is very brief, but I don't understand it. Could some kind soul PLEASE
explain in a little more detail what "the two outside leads" are and what to
connect here?
 
1. First you need the USB cable that came with the H320.

2. Next take a piece of wire and connect the two outside leads
and only the two outside leads. Click link to see picture.
 <http://www.misticriver.net/boards/attachment.php?attachmentid=848&stc=1>
http://www.misticriver.net/boards/at...ntid=848&stc=1

To connect the pins, plug your USB cable into the H300. You still have the
other end which should be connected to a PC. Now look closely at the PC end
of the cable and you'll see there is a small hole over each of the outside
pins. Stick the wire in there to connect the pins.

It should now say disconnected and start up as normal.
Received on 2007-10-07


Page was last modified "Jan 10 2012" The Rockbox Crew
aaa