David Hall wrote:
> chicken wrote:
>
>> It is a e280, but all the tutorials for e200 work fine on it so I've
>> follow them
>>
>
> "e200" is the Rockbox generic term for all players in the e2x0 series.
>
> --Soap
> -------------------------------------------------------------------
> List admin: http://cool.haxx.se/cgi-bin/mailman/listinfo/rockbox
> FAQ: http://www.rockbox.org/twiki/bin/view/Main/GeneralFAQ
> Etiquette: http://www.rockbox.org/mail/etiquette.html
>
>
Okay so I've downloaded the BL_SD_boardSupportSD.rom from the site, and
gave it a ./e200tool recover BL_SD_boardSupportSD.rom and it seems that
it wrote it on the usb:
> sudo ./e200tool recover BL_SD_boardSupportSD.rom
> e200tool v0.2.3-alpha (c) by MrH 2006, 2007
> Searching for device 0781:0720 ... found!
> Initializing USB stub (4780 bytes) ... done!
> Writing 'BL_SD_boardSupportSD.rom' to address 0x10600000
> Searching for device 6666:e200 ... 9 found!
> Write at 0x1066fcbc
> Write done!
> Running from address 0x10600000
> Searching for device 6666:e200 ... found!
> Execution started!

and now I got something in the sansa LCD
Load main image failed Switch to Recovery mode
Mini-B-> Device Mode
USB2.0 MSD
LUN0 locked
LUN0 unlocked
LUN0 locked
LUN0 unlocked
LUN0 locked
LUN0 unlocked
LUN0 locked
LUN0 unlocked
          and then I saw that I had the hold button on, then turn it off
and didn't repeat the message again, and nothing else

I'll disconect it and see if I can go into recovery mode or load a
bootloader
-------------------------------------------------------------------
List admin: http://cool.haxx.se/cgi-bin/mailman/listinfo/rockbox
FAQ: http://www.rockbox.org/twiki/bin/view/Main/GeneralFAQ
Etiquette: http://www.rockbox.org/mail/etiquette.html
Received on 2009-02-09