On Wed, 07 Dec 2005 23:49:40 +0100, Jens Arnold <arnold-j@t-online.de>
wrote:

> On 07.12.2005, Jerry Van Baren wrote:
>
>> My suggestion is to check for changes to the button voltage
>> conversion levels in button.c:
>> <http://www.rockbox.org/viewcvs.cgi/firmware/drivers/button.c?rev=1.101&view=log>

Thanks Jerry, I'll check that out - when I find some time.

> The OFF button is one of the two buttons that are not connected

And what's the other button? It seems to happen more often after an "ON"
press than after a press of left/right.

> to the ADC, but to a port pin, that's the puzzling part.

*and* it only shows up when rockbox is running from rom... makes it
perhaps even more unlikely that the ADC has something todo with it.

> Btw, I also observed this behaviour with my recorder V1 (only!),
> but have no idea so far what might cause this... It's the exact
> same thing, spurious OFF events at low bat. I'm always running
> rombox.
>
>
> Regards, Jens

Yay, I'm not alone anymore :-)
Btw, I have a V1 too, and *was* running rombox always, too.

Ronald
Received on Thu Dec 8 12:00:38 2005