Rockbox.org home
release
dev builds
extras
themes manual
wiki
device status forums
mailing lists
IRC bugs
patches
dev guide



Rockbox mail archive

Subject: Re: menu/settings merging take 2!

Re: menu/settings merging take 2!

From: Jonathan Gordon <jdgordy_at_gmail.com>
Date: Mon, 11 Sep 2006 16:18:24 +1000

Ok, discussion moving to the wiki, so if anyone wants to chip in
please visit http://www.rockbox.org/twiki/bin/view/Main/MenuSettingsRecoding

On 10/09/06, Jonathan Gordon <jdgordy_at_gmail.com> wrote:
> OK,
> well i only have the eq and crossfade settings to go and both config
> block tables are converted.. which means i'm now in the need of a
> small army to help finish the patch.
>
> What is needed is for the menus to be built up from the settings (not
> really hard, but lots of work), and then the really fun part can
> start... makeing sure everything works and is translatable and works.
>
> So, attached is my latest diff which apart from lacking menus is
> almost complete.
> The things that are missing is dynamic menus (they shouldnt be
> difficult to add.. but my first attempt on friday failed miserably),
> saving the iriver eeprom (should be no more than a #ifdef and some
> function calling) and I tihnk that is all..
>
> Some of the problems I have found converting the settings is that the
> value saved by code and what is shown in the menu doesnt correlate
> well, also, the LANG string for some settings are not ideal for this,
> so they will need to be fixed. and lastly, the set_int() widget needs
> a bit of rework to accomodate these settings.
>
> So does anyone want to volanteer to help out? I'll make a wiki page
> with progress if anyone does.
>
> Last thing, I just did a file size check on the h300 comparing to cvs
> and I am 14kb smaller which is really good because I dont tihnk the
> menus will use up all that room.
>
>
>
Received on 2006-09-11


Page was last modified "Jan 10 2012" The Rockbox Crew
aaa