Hi Ivan...

I have committed some changes to as3514 driver to enable lineIn 1 and
set some default gain.
Lets hope FM chip is connected to LineIn1 else we could try LineIn 2.
Please keep me up2date...

greets,
Christian

2007/5/13, Christian Gmeiner <christian.gmeiner_at_gmail.com>:
> Hi Ivan..
>
> can we meet us in irc... I will hang around for the next 2-3 hours
> there. My nick
> is austriancoder. It should be a work of 10-15 minutes. Or I can
> modify the driver
> to enable lines and micros and you can check which is needed. I have only a
> Sansa without radio :(
>
> See you there
>
> 2007/5/13, Ivan Zupan <zivan56_at_iwdstudio.com>:
> > Hi all,
> >
> > I am working on a Sansa radio driver. So far, I have implemented the
> > basics for the LV24020LP chip, and have been able to tune and measure
> > signal strength. However, I need some help with getting the AS5314 chip
> > to enable line in (or mic in depending on how they connect the radio).
> > Since the AS chip is covered by an NDA of sorts, I need someone who
> > signed it to update the driver so that we can get these two sources to
> > "mix" (or just channel one of them) to the headphone jack.
> >
> > TIA,
> > Ivan
> >
> >
>
Received on 2007-05-13