> I don't have enough informsation about these, so I won't say anything:
> * Philips GoGear HDD16X0/18X0

This port is mostly complete and could be supported now. Off the top of my head, here's what needs to be done hardware-wise:
1) battery bench & calibration
2) lcd enable & sleep
3) backlight fading
4) radio detection (there's no radio in the HDD1620/1820)
5) better keymap

Installation is the same as the H10, so hopefully someone can add it to rbutil. If someone whats to start the manual, the H10 5GB would be a good place start since it's the same lcd size. There's even a svg waiting on flyspray (FS#10329).

> * Philips GoGear SA9200

This is nearly complete. I have a couple of commits pending, then I think all that's left is the plugins. Since this device is MTP only, the initial installation will require using sendfirm to send over a tar'd build that the bootloader can untar (unless someone wants add usb to the bootloader).

> * Samsung YH82X/YH92X

I don't think these are quite ready yet. There's still some hardware stuff to work on (no sound on the 920) and there are no plugins yet.

Mark

      
Received on 2009-07-15