I am terribly sorry. I measured pitch of the connector against lm339 on the
photo and connector is standard 1.0 mm pitch. This one is easy to get. Sorry
again.
Anyway - Linus can You confirm H300 uses 20pin 1.0mm pitch connector - from
photos it looks exactly the same as in HD200.

2009/11/23 Marcin Bukat <marcin.bukat_at_gmail.com>

> Hi Linus,
> Looking at H300 BDM port I think HD200 use the same connector so You
> probably know the proper part pitch.
>
> 2009/11/23 Marcin Bukat <marcin.bukat_at_gmail.com>
>
> I am not. I may be 0.5 mm as well. I can't measure pitch properly.
>>
>> 2009/11/23 pondlife <pondlife_at_ntlworld.com>
>>
>> Hi Linus,
>>>
>>> Slightly hijacking this thread, does the H300 BDM interface have a
>>> connector? I assumed it was a soldering job, but if it's pluggable, I
>>> plan
>>> to buy a wiggler!
>>>
>>> pondlife
>>>
>>>
>>>
>>>
>>
>
Received on 2009-11-23