Rockbox.org home
release
dev builds
extras
themes manual
wiki
device status forums
mailing lists
IRC bugs
patches
dev guide



Rockbox mail archive

Subject: Re: Some JTAGd players

Re: Some JTAGd players

From: Thomas Martitz <kugel_at_rockbox.org>
Date: Wed, 09 Jan 2013 09:13:03 +0100

Karl Kurbjun <kkurbjun_at_gmail.com> schrieb:

>Hey all,
>
>I am in the process of cleaning up some old projects and I have a
>couple of
>development devices that I no longer need for so I thought I would see
>if
>there is interest here.
>
>The first is a Gigabeat F with JTAG and UART soldered out the side with
>a
>ribbon cable - it is missing the side and bottom panel but is otherwise
>in
>one piece. The touch pad is sensitive which makes it difficult to use
>through the menus, but I might have another digitizer I can send with
>it
>along with some other spare parts. It has a 30GB hard drive.
>
>The second is an Olympus M:Robe 500 with JTAG soldered out the top
>(with a
>small cut in the case to accommodate the ribbon cable). From what I
>recall
>JTAG is a bit twitchy though. The Olympus comes with a stand, remote
>control, and a homemade USB cable. There is a 20GB hard drive in this
>device and I have replaced the flash so it has a fully replaced
>bootloader
>- boot time from fully off is about 10 seconds or so. The boot process
>is
>a little iffy though - sometimes the screen tweaks out and it has to be
>reset.
>
>Both would come with a power supply if I can find them.
>
>I do not have time to hack on them anymore so they are free to a
>developer
>that would give them a good home (if anyone is even interested). I
>don't
>mind shipping in the USA for free - anything else would have to be
>discussed.
>
>-Karl

Sorry to hear you spare time doesn't allow rockbox hacking anymore.

The shipping can be handled by the fund, I'd say.

Best regards.
Received on 2013-01-09


Page was last modified "Jan 10 2012" The Rockbox Crew
aaa