Index: firmware/target/arm/as3525/system-as3525.c
===================================================================
--- firmware/target/arm/as3525/system-as3525.c	(revision 28563)
+++ firmware/target/arm/as3525/system-as3525.c	(working copy)
@@ -262,7 +262,11 @@
 #endif
                   AS3525_PCLK_SEL);
 
-    set_cpu_frequency(CPUFREQ_DEFAULT);
+#if CONFIG_CPU == AS3525
+    cpu_frequency = CPUFREQ_DEFAULT;    /* fastbus */
+#else
+    cpu_frequency = CPUFREQ_MAX;
+#endif
 
 #if 0 /* the GPIO clock is already enabled by the dualboot function */
     CGU_PERI |= CGU_GPIO_CLOCK_ENABLE;
@@ -363,14 +367,16 @@
         while(adc_read(ADC_CVDD) < 470); /* 470 * .0025 = 1.175V */
 #endif  /*  HAVE_ADJUSTABLE_CPU_VOLTAGE */
 
-        CGU_PROC = ((AS3525_FCLK_POSTDIV << 4) |
-                    (AS3525_FCLK_PREDIV  << 2) |
-                     AS3525_FCLK_SEL);
-
         asm volatile(
             "mrc p15, 0, r0, c1, c0  \n"
+
+#ifdef ASYNCHRONOUS_BUS
+            "orr r0, r0, #3<<30      \n"   /* asynchronous bus clocking */
+#else
             "bic r0, r0, #3<<30      \n"   /* clear bus bits */
             "orr r0, r0, #1<<30      \n"   /* synchronous bus clocking */
+#endif
+
             "mcr p15, 0, r0, c1, c0  \n"
             : : : "r0" );
 
@@ -384,8 +390,6 @@
             "mcr p15, 0, r0, c1, c0  \n"
             : : : "r0" );
 
-        /* FCLK is unused so put it to the lowest freq we can */
-        CGU_PROC = ((0xf << 4) | (0x3 << 2) | AS3525_CLK_MAIN);
 
 #ifdef HAVE_ADJUSTABLE_CPU_VOLTAGE
         /* Decreasing frequency so reduce voltage after change */
Index: firmware/target/arm/as3525/clock-target.h
===================================================================
--- firmware/target/arm/as3525/clock-target.h	(revision 28563)
+++ firmware/target/arm/as3525/clock-target.h	(working copy)
@@ -139,6 +139,7 @@
 #define AS3525_FCLK_POSTDIV      (CLK_DIV((AS3525_PLLA_FREQ*(8-AS3525_FCLK_PREDIV)/8), AS3525_FCLK_FREQ) - 1) /*div=1/(n+1)*/
 
 #if CONFIG_CPU == AS3525v2
+/* On as3525v2 we change fclk by writing to CGU_PROC */
 #define AS3525_FCLK_POSTDIV_UNBOOSTED      (CLK_DIV((AS3525_PLLA_FREQ*(8-AS3525_FCLK_PREDIV)/8), CPUFREQ_NORMAL) - 1) /*div=1/(n+1) */
 /* Since pclk is based on fclk, we need to change CGU_PERI as well */
 #define AS3525_PCLK_DIV0_UNBOOSTED (CLK_DIV(CPUFREQ_NORMAL, AS3525_DRAM_FREQ) - 1) /*div=1/(n+1)*/
@@ -163,19 +164,22 @@
 
 /* PCLK */
 
-#if CONFIG_CPU == AS3525
+/* Figure out if we need to use asynchronous bus */
+#if ((CONFIG_CPU == AS3525) && (AS3525_FCLK_FREQ % AS3525_PCLK_FREQ))
+#define ASYNCHRONOUS_BUS                          /* Boosted mode asynchronous */
+#endif
 
-#define AS3525_PCLK_SEL          AS3525_CLK_PLLA
+#ifdef ASYNCHRONOUS_BUS
+#define AS3525_PCLK_SEL          AS3525_CLK_PLLA    /* PLLA input for asynchronous */
+#define AS3525_PCLK_DIV0         (CLK_DIV(AS3525_PLLA_FREQ, AS3525_DRAM_FREQ) - 1)/*div=1/(n+1)*/
+#else /* ASYNCHRONOUS_BUS */
+#define AS3525_PCLK_SEL          AS3525_CLK_FCLK    /* Fclk input for synchronous */
+#define AS3525_PCLK_DIV0         (CLK_DIV(AS3525_FCLK_FREQ, AS3525_DRAM_FREQ) - 1) /*div=1/(n+1)*/
+#endif /* ASYNCHRONOUS_BUS */
+
          /*unable to use AS3525_PCLK_DIV1 != 0 successfuly so far*/
 #define AS3525_PCLK_DIV1         (CLK_DIV(AS3525_DRAM_FREQ, AS3525_PCLK_FREQ) - 1)/* div = 1/(n+1)*/ 
-#define AS3525_PCLK_DIV0         (CLK_DIV(AS3525_PLLA_FREQ, AS3525_DRAM_FREQ) - 1) /*div=1/(n+1)*/
-#else
 
-#define AS3525_PCLK_SEL          AS3525_CLK_FCLK
-#define AS3525_PCLK_DIV0         (CLK_DIV(AS3525_FCLK_FREQ, AS3525_DRAM_FREQ) - 1) /*div=1/(n+1)*/
-
-#endif /* CONFIG_CPU */
-
    /* PCLK as Source */
   #define AS3525_DBOP_DIV        (CLK_DIV(AS3525_PCLK_FREQ, AS3525_DBOP_FREQ) - 1) /*div=1/(n+1)*/
   #define AS3525_I2C_PRESCALER   CLK_DIV(AS3525_PCLK_FREQ, AS3525_I2C_FREQ)
Index: firmware/export/config/sansafuze.h
===================================================================
--- firmware/export/config/sansafuze.h	(revision 28563)
+++ firmware/export/config/sansafuze.h	(working copy)
@@ -162,7 +162,7 @@
 #define CONFIG_I2C I2C_AS3525
 
 /* define current usage levels (based on battery bench) */
-#define CURRENT_NORMAL     35
+#define CURRENT_NORMAL     37
 #define CURRENT_BACKLIGHT  30
 #define CURRENT_RECORD     CURRENT_NORMAL