This is the bug/patch tracker for Rockbox. Click here for more information.
Quick links: Bugs · Patches · Rockbox frontpage
FS#5547 - H1xx bootloader will not switch on if only one of the hold switches is off
Attached to Project:
Rockbox
Opened by Anonymous Submitter - Wednesday, 14 June 2006, 22:31 GMT+1
Opened by Anonymous Submitter - Wednesday, 14 June 2006, 22:31 GMT+1
|
DetailsWhen using the H120 (and presumably other H100 series) remote to switch on the iriver player (using the main remote Play button), it will only switch on if both the remote and main unit hold switches are off - if only the remote hold switch is off, it displays the message:
Hold switch on, Power off. and then turns the power off. This also seems to be the case if the main unit hold switch is off and the remote hold switch is on. The original iriver bootloader used the two hold switches independently to control response to remote and main unit respectively. |
This task depends upon
Closed by Rani Hod (RaeNye)
Monday, 18 September 2006, 00:54 GMT+1
Reason for closing: Works For Me
Additional comments about closing: The OP didn\'t respond and it worked for Paul.
Monday, 18 September 2006, 00:54 GMT+1
Reason for closing: Works For Me
Additional comments about closing: The OP didn\'t respond and it worked for Paul.
Comment by Paul Louden (darkkone) -
Wednesday, 14 June 2006, 22:51 GMT+1
Works for me. If you don't check back on this task in the next two days, I'm going to close it, as you've not posted what build you're running, or any other useful information, and my unit works as intended.
Comment by Linus Nielsen Feltzing (linusnielsen) -
Thursday, 15 June 2006, 12:32 GMT+1
The thing is that you need to hold the remote Play button a little longer. Also, you need to have the latest bootloader.