Rockbox

Tasklist

FS#6136 - No Sound from MP3s on 4G IPOD Greyscale

Attached to Project: Rockbox
Opened by nuremon (nuremon) - Friday, 06 October 2006, 21:22 GMT
Last edited by Steve Bavin (pondlife) - Monday, 09 October 2006, 13:17 GMT
Task Type Bugs
Category Music playback
Status Closed
Assigned To No-one
Operating System iPod 4G Grayscale
Severity Medium
Priority Normal
Reported Version
Due in Version Undecided
Due Date 2006-10-09
Percent Complete 100%
Votes 0
Private No

Details

In the daily builds for 10/3 and 10/6 I get no sound from the IPOD. I have an old 8/23 build that still runs fine, but they're unstable. That's why I was trying to upgrade.
This task depends upon

Closed by  Paul Louden (darkkone)
Thursday, 12 October 2006, 07:20 GMT
Reason for closing:  Invalid
Additional comments about closing:  User Error.
Comment by Paul Louden (darkkone) - Saturday, 07 October 2006, 01:55 GMT
Have you reset your settings?
Comment by nuremon (nuremon) - Saturday, 07 October 2006, 11:53 GMT
I have not explicitly reset the settings, but charging via the firewire adapter (which is the only good way to charge) usually resets most of my settings. Are you talking about the Manage Settings -> Reset Settings menu? I haven't looked at the documentation since early July when I got the iPod, are there settings that will make the iPod stop outputting sound?
Comment by Paul Louden (darkkone) - Saturday, 07 October 2006, 18:23 GMT
The first step in diagnosing a problem is putting a CVS build on, and using the button combination require to clear settings while booting, so that the problem may be approached from an entirely clean slate.
Comment by Paul Louden (darkkone) - Monday, 09 October 2006, 02:55 GMT
Are you still experiencing this problem after following my suggestion?
Comment by nuremon (nuremon) - Wednesday, 11 October 2006, 02:55 GMT
Sorry it took so long, but I just ran the <a href=http://www.rockbox.org/dist/build-ipod4gray/rockbox.zip>2006-10-11%2002:25:29</a> CVS load with the hold button set (which is your magic button configuration). No sound confirmed. I reverted to the Daily Build from late August that I had been using and I got sound (same mp3). So, yeah. I can't be the only using a 4G Greyscale, can I?

Thanks
Comment by Paul Louden (darkkone) - Wednesday, 11 October 2006, 03:00 GMT
You aren't, but you are the only person who's having this problem. Did it actually say "cleared" on the screen when you cleared the settings during boot?
Comment by nuremon (nuremon) - Wednesday, 11 October 2006, 21:41 GMT
It did in fact have the little box that said "Cleared". Is there something else I should be doing? I'm sorry to cause the extra headache. I can try going back to the oldest daily build I can get to and see if I get sound from it.
Comment by Paul Louden (darkkone) - Wednesday, 11 October 2006, 21:43 GMT
Okay, while the MP3 is playing, all the information on the WPS is normal? The playback bar moves, etc? And this very same MP3 plays succesfully in the 8/23 build?

I assume you've tried several files and they all work under the old conditions but not the new firmware?
Comment by nuremon (nuremon) - Thursday, 12 October 2006, 00:38 GMT
Well, here's the deal. I didn't realize that the firmware was more than the rockbox.ipod file. I'm on an iBook and I have not yet figured out how to make it show all files. I was (finally) able to find the right command to give from the CLI and copied the .rockbox folder to the right place and it is now working (today's daily build). Sorry about the confusion.

Loading...