Rockbox

Tasklist

FS#7084 - bootloader looses rockbox firmware

Attached to Project: Rockbox
Opened by pixel (pixel) - Thursday, 26 April 2007, 22:30 GMT
Last edited by Dominik Riebeling (bluebrother) - Saturday, 29 September 2007, 08:02 GMT
Task Type Bugs
Category Bootloader
Status Closed
Assigned To No-one
Operating System iPod 5G
Severity Low
Priority Normal
Reported Version
Due in Version Undecided
Due Date Undecided
Percent Complete 100%
Votes 0
Private No

Details

ipod switches to standard firmware when switched off for few hours

it happens all the time
when ipod goes to sleep it wakes up under standard firmware

it's not because battery is weak or dead

when it wakes up it already has standard folders (which I removed)
rockbox folder is intacted so running ipodpatcher.exe resolves the issue
This task depends upon

Closed by  Dominik Riebeling (bluebrother)
Saturday, 29 September 2007, 08:02 GMT
Reason for closing:  Out of Date
Additional comments about closing:  the hold switch boots into the OF since quite a while.
Comment by Dominik Riebeling (bluebrother) - Thursday, 26 April 2007, 23:26 GMT
how do you shutdown the player? You need to shut it down as described in the manual, not resetting it.
Comment by pixel (pixel) - Monday, 30 April 2007, 15:38 GMT
i just left it paused and locked on night
it felt into sleep mode (it was night :)
then in the morning i just unlock it and pres the button to wake it up
ipod started with language selection screen and then showed me regular menu (native firmware)
it happend many times
after reset ipod runs rockbox!

what i discover (i know it sounds stupid) is when i don't delete standard ipod folders
(calendar notes and so on)then std-ipod firmware doesn't appear so often
Comment by Carl Godfrey (qamelian) - Wednesday, 06 June 2007, 19:15 GMT
I can confirm this problem as well. I just installed Rockbox on a recently purchased iPod 80 GB. The Rockbox firmware loads fine immediately after patch. After the iPod has been shutdown for a few hours a reset of the iPod is needed to launch ROckbox again.
Comment by Dave Chapman (linuxstb) - Tuesday, 24 July 2007, 07:46 GMT
Did you have your ipod plugged into USB at the time? If you leave your ipod with the hold switch on and power attached, then (because Rockbox doesn't detect charger power on all ipod models correctly at the moment), it will shut down after the configurable "idle timeout".

But because power is attached, it will immediately turn itself back on, and because the hold switch is also on, it will start the Apple firmware.
Comment by Jake Johnson (jrjohns3) - Monday, 30 July 2007, 18:04 GMT
I have a 4gb nano with the same problem. It boots to the apple firmware if I have the hold on and I plug in the USB. Will this be fixed in later releases?
Thanks for all the great work, I finally like my ipod now that I have rockbox!

Loading...