Index: firmware/target/arm/sandisk/sansa-e200/lcd-e200.c
===================================================================
--- firmware/target/arm/sandisk/sansa-e200/lcd-e200.c	(revision 14452)
+++ firmware/target/arm/sandisk/sansa-e200/lcd-e200.c	(working copy)
@@ -36,8 +36,8 @@
 static unsigned short r_disp_control_rev = R_DISP_CONTROL_NORMAL;
 
 /* Flipping */
-#define R_DRV_OUTPUT_CONTROL_NORMAL  0x101b
-#define R_DRV_OUTPUT_CONTROL_FLIPPED 0x131b
+#define R_DRV_OUTPUT_CONTROL_NORMAL  0x121b
+#define R_DRV_OUTPUT_CONTROL_FLIPPED 0x111b
 static unsigned short r_drv_output_control  = R_DRV_OUTPUT_CONTROL_NORMAL;
 
 #define LCD_DATA_IN_GPIO GPIOB_INPUT_VAL
@@ -221,7 +221,7 @@
      * AM: horizontal update direction
      * ID1-0: H decrement, V increment
      */
-    lcd_write_reg(R_ENTRY_MODE, 0x6020);
+    lcd_write_reg(R_ENTRY_MODE, 0x6000);
     lcd_write_reg(R_COMPARE_REG1, 0x0000);
     lcd_write_reg(R_COMPARE_REG2, 0x0000);
     /* FP3-0=0001, BP3-0=0010 */
@@ -265,7 +265,7 @@
     /* WRN14-10=00000, VRN03-00=0000 */
     lcd_write_reg(R_GAMMA_AMP_ADJ_NEG, 0x0000);
     /* AD15-0=175 (upper right corner) */
-    lcd_write_reg(R_RAM_ADDR_SET, 175);
+    lcd_write_reg(R_RAM_ADDR_SET, (219 << 8)+175);
     /* RM=1, DM1-0=01, RIM1-0=00 */
     lcd_write_reg(R_EXT_DISP_INTF_CONTROL, 0x0110);
 
@@ -397,7 +397,7 @@
     LCD_REG_7 &= (0xfffff800);
 
     LCD_REG_8 = (LCD_REG_8 & (0xf800ffff)) | (0xb0 << 16);
-    LCD_REG_8 = (LCD_REG_8 & (0xfffff800)) | (0xde); /* X-Y Geometry? */
+    LCD_REG_8 = (LCD_REG_8 & (0xfffff800)) | (0xdc); /* X-Y Geometry? */
 
     LCD_REG_5 |= 0xc;
     LCD_REG_5 = (LCD_REG_5 & ~(0x70)) | (0x3 << 4);