Index: spi-dm320.c
===================================================================
--- spi-dm320.c	(revision 16630)
+++ spi-dm320.c	(working copy)
@@ -31,6 +31,7 @@
 #define GIO_TS_ENABLE  (1<<2)
 #define GIO_RTC_ENABLE (1<<12)
 #define GIO_BL_ENABLE  (1<<13)
+#define GIO_LCD_ENABLE (1<<5)
 
 struct mutex spi_mtx;
 
@@ -42,9 +43,12 @@
 #define reg(a) ((volatile unsigned short *)(PHY_IO_BASE+a))
 struct SPI_info spi_targets[] =
 {
+#ifndef CREATIVE_ZVM
     [SPI_target_TSC2100]   = { &IO_GIO_BITCLR1, &IO_GIO_BITSET1, GIO_TS_ENABLE },
-    [SPI_target_RX5X348AB] = { &IO_GIO_BITSET0, &IO_GIO_BITCLR0, GIO_RTC_ENABLE },
+    [SPI_target_RX5X348AB] = { &IO_GIO_BITSET0, &IO_GIO_BITCLR0, GIO_RTC_ENABLE},
     [SPI_target_BACKLIGHT] = { &IO_GIO_BITCLR1, &IO_GIO_BITSET1, GIO_BL_ENABLE },
+#endif
+    [SPI_target_LTV250QV] =  { &IO_GIO_BITCLR2, &IO_GIO_BITSET2, GIO_LCD_ENABLE},
 };
 
 static void spi_disable_all_targets(void)
@@ -98,11 +102,12 @@
     IO_SERIAL0_MODE |= 1<<10;
     /* Enable TX */
     IO_SERIAL0_TX_ENABLE = 0x0001;
-
+#ifndef CREATIVE_ZVM
     /* Set GIO 18 to output for touch screen slave enable */
     IO_GIO_DIR1 &= ~GIO_TS_ENABLE;
     /* Set GIO 12 to output for rtc slave enable */
     IO_GIO_DIR0 &= ~GIO_RTC_ENABLE;
-    
+#endif  
     spi_disable_all_targets(); /* make sure only one is ever enabled at a time */
+
 }
Index: spi-target.h
===================================================================
--- spi-target.h	(revision 16630)
+++ spi-target.h	(working copy)
@@ -27,6 +27,7 @@
     SPI_target_TSC2100 = 0,
     SPI_target_RX5X348AB,
     SPI_target_BACKLIGHT,
+    SPI_target_LTV250QV,
     SPI_MAX_TARGETS,
 };