Flyspray:: Mon, 27 Oct 2014 17:42:51 +0000 Flyspray:: Rockbox: Recently opened tasks http://www.rockbox.org/tracker/ FS#13010: Support for .m4a of youtube smtube. Stevan Fri, 17 Oct 2014 22:47:55 +0000 http://www.rockbox.org/tracker/task/13010 http://www.rockbox.org/tracker/task/13010 FS#13009: Sansa Clip+ Seeking Fails When Playback Is Paused Zian Choy Mon, 13 Oct 2014 04:47:28 +0000
I was able to reproduce the problem with multiple WMA files that were encoded using Expression Encoder with the WMA codec and VBR. A sample file is available at https://onedrive.live.com/redir?resid=87EA02230C32BE40!724&authkey=!AFyvy4opeP7Ib9w&ithint=file%2cwma and if the link is dead, please let me know.

Steps to Reproduce:

1. Add a WMA file to the Clip+.
2. Disconnect the device from the computer by doing a "Safely Remove" or "Eject".
3. Turn off the device.
4. Turn on the device.
5. Scroll down to "Database" and press the middle button.
6. Scroll to Album and press the middle button.
7. Press the Up button one time.
8. "What The Dog Saw" is probably selected unless you have albums that start with W, X, Y, or Z. If "What The Dog Saw" is not selected, the scroll until it is.
9. Press the middle button.
10. Press the middle button to start playing the first track.
11. Press the Up button to pause playback.
12. Press and hold the Right button to seek to somewhere around 11:00 or later.
13. Release the Right button.

Observe that the timestamp on the left now says something like "0:04" rather than the desired time.

System Details:
- Sansa Clip+
- Rockbox Version 3.13]]>
http://www.rockbox.org/tracker/task/13009 http://www.rockbox.org/tracker/task/13009
FS#13008: Serbian translation update Ivan Pesic Sat, 11 Oct 2014 18:49:45 +0000
]]>
http://www.rockbox.org/tracker/task/13008 http://www.rockbox.org/tracker/task/13008
FS#13007: FM Region "Other": Enable full frequency range. Oid Maps Mon, 29 Sep 2014 09:26:16 +0000
With this patch, the "full range" from 76 MHz to 108 MHz, in 0.05 MHz steps, is available when selecting the "Other" region.
]]>
http://www.rockbox.org/tracker/task/13007 http://www.rockbox.org/tracker/task/13007
FS#13006: Gapless playback of OGG Vorbis is not working. Osmo Hyttinen Sat, 27 Sep 2014 05:58:58 +0000 Official firmware plays same files gaplessly without the background noise.]]> http://www.rockbox.org/tracker/task/13006 http://www.rockbox.org/tracker/task/13006 FS#13005: High-pitched background noise NOT PRESENT on official firmware Osmo Hyttinen Sat, 27 Sep 2014 05:54:39 +0000 NOT PRESENT on official firmware]]> http://www.rockbox.org/tracker/task/13005 http://www.rockbox.org/tracker/task/13005 FS#13004: ATA Error 11 with mSata SSD installed using mSata-ZIF adapter Dmitry Fri, 26 Sep 2014 09:13:35 +0000 Both iTunes & Rockbox are working fine with this setup.

Then I tried to increase the storage space by using mSata SSD 64 GB + mSata-ZIF adapter. iTunes recovered the iPod successfully and it is working just fine. I installed Rockbox latest stable (non-stable latest = same thing) version & after the Rockbox boot-up it reporting an ATA error -11.

I wonder if this can be solved.

Thanks!]]>
http://www.rockbox.org/tracker/task/13004 http://www.rockbox.org/tracker/task/13004
FS#13003: Scrolling line broken if put directly after sublines. Oid Maps Wed, 24 Sep 2014 08:38:27 +0000
I discovered something which seems to be a bug somewhere in the place where WPS get interpreted or rendered.

When I use a scrolling line just after a line containing sublines, the scrolling line stops scrolling as soon as the sublines change the first time.

Below are steps to reproduce it on the UI simulator for the Sansa Fuzev2. I think it also works without using a clear configuration. I haven't tested with a real device, only with the simulator.

Attached are a .wps-file showing the buggy behaviour ('scrollline_after_sublines_bug.buggy.wps'), and a .wps-file working correctly ('scrollline_after_sublines_bug.workaround.wps'), which are the same files as quoted below.


STEPS TO REPRODUCE:

(0) Use Sansa Fuzev2 simulator version d392da8-140922, build from git on a 64 bit Linux system.

(1) Use a clear configuration, so erase
.rockbox/.playlist_control
.rockbox/config.cfg
.rockbox/nvram.bin
.rockbox/database.ignore
in your 'simdisk' directory.

(2) Start the rockbox UI simulator

(3) Change the theme to 'rockbox_failsafe', i.e. in the menu, do the following:
* 'Settings' -> 'Theme Settings' -> 'Browse Theme Files' -> 'rockbox_failsafe.cfg'
* 'Settings' -> 'Theme Settings' -> 'While Playing Screen' -> 'rockbox_failsafe.wps'
* 'Settings' -> 'Theme Settings' -> 'Radio Screen' -> 'rockbox_failsafe.fms'
* 'Settings' -> 'Theme Settings' -> 'Base Skin' -> 'rockbox_failsafe.sbs'

(4) Use the following .wps-file as the "While Playing Screen" skin:

==>
# Two sublines:
Text1;Text2
# A long line, scrolling:
%sA very long text which is meant to scroll because it is longer than the screen is wide.
# Another line of just text (Not needed to reproduce the bug, but if it is swapped with the long line above, the long line scrolles correctly):
Textline.
#### Here the following Bug appears:
# When the Line 'Text1;Text2' changes the sublines the first time, the subsequent line stops scrolling. It happens when the sublines change; as when you use '%t(5)Text1;Text2', the scrolling stops only after 5 seconds, when the sublines actually change.

# Two sublines:
Text1;Text2
# Another line of just text. Needed to make the long line scrolling correctly:
Textline.
# A long line, scrolling:
%sA very long text which is meant to scroll because it is longer than the screen is wide.
#### Here the bug does not appear, the long line scrolls corretly. But when the long scrolling line is put just below the line with the sublines, it stops scrolling as soon as the sublines change for the first time.
]]>
http://www.rockbox.org/tracker/task/13003 http://www.rockbox.org/tracker/task/13003
FS#13002: Fails to build from source under long build path with "execvp: /bin/sh: Argument list too long". Oid Maps Mon, 22 Sep 2014 15:21:44 +0000
==>
make: execvp: /bin/sh: Argument list too long

Using temporary directory /tmp
Platform set to sansafuzev2
Normal build selected
Using source code root directory: /home/myuser/download/mediaplayer_hardware/SanDisk/Sansa_Fuze_v2/rockbox/firmware/source/rockbox
Using arm-elf-eabi-gcc 4.4.4 (404)
Using arm-elf-eabi-ld 2.20.1.20100303
Found and uses ccache (/sbin/ccache)
Automatically selected arch: arm (ver 5)
Created Makefile

Generating dependencies
make: execvp: /bin/sh: Argument list too long
make: *** No rule to make target '/home/myuser/download/mediaplayer_hardware/SanDisk/Sansa_Fuze_v2/rockbox/firmware/source/build_FuzeV2/make.dep', needed by 'all'. Stop.
]]>
http://www.rockbox.org/tracker/task/13002 http://www.rockbox.org/tracker/task/13002
FS#13001: Portugal Portuguese Update Tiago Medeiros Sun, 21 Sep 2014 22:37:33 +0000
Cheers!]]>
http://www.rockbox.org/tracker/task/13001 http://www.rockbox.org/tracker/task/13001