[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-16-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 04:02:15 UTC 2009 (Ubuntu 2.6.31-16.53-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic root=UUID=188fe8e3-1ed0-4a97-925d-43d0ec64d468 ro splash quiet quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003bfd0000 (usable) [ 0.000000] BIOS-e820: 000000003bfd0000 - 000000003bfde000 (ACPI data) [ 0.000000] BIOS-e820: 000000003bfde000 - 000000003c000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3bfd0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFE0000000 write-back [ 0.000000] 1 base 0020000000 mask FFF0000000 write-back [ 0.000000] 2 base 0030000000 mask FFF8000000 write-back [ 0.000000] 3 base 0038000000 mask FFFC000000 write-back [ 0.000000] 4 base 00000F8000 mask 0FFFFF8000 write-protect [ 0.000000] 5 base 00000DC000 mask 0FFFFFE000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at /build/buildd/linux-2.6.31/arch/x86/kernel/cpu/mtrr/generic.c:456 generic_get_mtrr+0x11e/0x140() [ 0.000000] Hardware name: MS-7309 [ 0.000000] mtrr: your BIOS has set up an incorrect mask, fixing it up. [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.31-16-generic #53-Ubuntu [ 0.000000] Call Trace: [ 0.000000] [] warn_slowpath_common+0x78/0xb0 [ 0.000000] [] warn_slowpath_fmt+0x3c/0x40 [ 0.000000] [] generic_get_mtrr+0x11e/0x140 [ 0.000000] [] mtrr_trim_uncached_memory+0x91/0x2d1 [ 0.000000] [] ? mtrr_bp_init+0x1ab/0x1d2 [ 0.000000] [] setup_arch+0x3d0/0x647 [ 0.000000] [] ? printk+0x3c/0x3f [ 0.000000] [] start_kernel+0xbe/0x35b [ 0.000000] [] x86_64_start_reservations+0x125/0x129 [ 0.000000] [] x86_64_start_kernel+0xfa/0x109 [ 0.000000] ---[ end trace a7919e7f17c0a725 ]--- [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003bfd0000 (usable) [ 0.000000] modified: 000000003bfd0000 - 000000003bfde000 (ACPI data) [ 0.000000] modified: 000000003bfde000 - 000000003c000000 (ACPI NVS) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000003bfd0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 003be00000 page 2M [ 0.000000] 003be00000 - 003bfd0000 page 4k [ 0.000000] kernel direct mapping tables up to 3bfd0000 @ 10000-13000 [ 0.000000] RAMDISK: 2c85d000 - 2d01b4ce [ 0.000000] ACPI: RSDP 00000000000f9140 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 000000003bfd0000 00038 (v01 A M I OEMRSDT 01000724 MSFT 00000097) [ 0.000000] ACPI: FACP 000000003bfd0200 00084 (v02 A M I OEMFACP 01000724 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000003bfd0440 04395 (v01 1ADMB 1ADMB006 00000006 INTL 20051117) [ 0.000000] ACPI: FACS 000000003bfde000 00040 [ 0.000000] ACPI: APIC 000000003bfd0390 00070 (v01 A M I OEMAPIC 01000724 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000003bfd0400 0003C (v01 A M I OEMMCFG 01000724 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000003bfde040 00060 (v01 A M I AMI_OEM 01000724 MSFT 00000097) [ 0.000000] ACPI: HPET 000000003bfd47e0 00038 (v01 A M I OEMHPET0 01000724 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003bfd0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003bfd0000 [ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff] [ 0.000000] bootmap [0000000000016000 - 000000000001d7ff] pages 8 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 003bfd0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019e4ccc] TEXT DATA BSS ==> [0001000000 - 00019e4ccc] [ 0.000000] #3 [002c85d000 - 002d01b4ce] RAMDISK ==> [002c85d000 - 002d01b4ce] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00019e5000 - 00019e51a8] BRK ==> [00019e5000 - 00019e51a8] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880001e00000-ffff880002bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003bfd0 [ 0.000000] On node 0 totalpages: 245599 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 100 pages reserved [ 0.000000] DMA zone: 3827 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3304 pages used for memmap [ 0.000000] DMA32 zone: 238312 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3c000000 (gap: 3c000000:c2c00000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff8800019f0000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 242139 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic root=UUID=188fe8e3-1ed0-4a97-925d-43d0ec64d468 ro splash quiet quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ cc02000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 949624k/982848k available (5315k kernel code, 452k absent, 32772k reserved, 3018k data, 660k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2109.862 MHz processor. [ 0.000014] spurious 8259A interrupt: IRQ7. [ 0.003252] Console: colour VGA+ 80x25 [ 0.003256] console [tty0] enabled [ 0.009798] allocated 10485760 bytes of page_cgroup [ 0.009802] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.009978] hpet clockevent registered [ 0.009982] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.009990] Calibrating delay loop (skipped), value calculated using timer frequency.. 4219.72 BogoMIPS (lpj=21098620) [ 0.010000] Security Framework initialized [ 0.010000] AppArmor: AppArmor initialized [ 0.010000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.010000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.010000] Mount-cache hash table entries: 256 [ 0.010000] Initializing cgroup subsys ns [ 0.010000] Initializing cgroup subsys cpuacct [ 0.010000] Initializing cgroup subsys memory [ 0.010000] Initializing cgroup subsys freezer [ 0.010000] Initializing cgroup subsys net_cls [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 0/0x0 -> Node 0 [ 0.010000] tseg: 0000000000 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] mce: CPU supports 5 MCE banks [ 0.010000] using C1E aware idle routine [ 0.010000] Performance Counters: AMD PMU driver. [ 0.010000] ... version: 0 [ 0.010000] ... bit width: 48 [ 0.010000] ... generic counters: 4 [ 0.010000] ... value mask: 0000ffffffffffff [ 0.010000] ... max period: 00007fffffffffff [ 0.010000] ... fixed-purpose counters: 0 [ 0.010000] ... counter mask: 000000000000000f [ 0.010000] ACPI: Core revision 20090521 [ 0.010000] Setting APIC routing to flat [ 0.010200] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.110228] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01 [ 0.120000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 4219.47 BogoMIPS (lpj=21097380) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] mce: CPU supports 5 MCE banks [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.270484] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01 [ 0.270498] Brought up 2 CPUs [ 0.270500] Total of 2 processors activated (8439.20 BogoMIPS). [ 0.270588] CPU0 attaching sched-domain: [ 0.270591] domain 0: span 0-1 level MC [ 0.270594] groups: 0 1 [ 0.270599] CPU1 attaching sched-domain: [ 0.270601] domain 0: span 0-1 level MC [ 0.270603] groups: 1 0 [ 0.270677] Booting paravirtualized kernel on bare hardware [ 0.270677] regulator: core version 0.5 [ 0.270677] Time: 10:40:24 Date: 01/02/10 [ 0.270677] NET: Registered protocol family 16 [ 0.270677] node 0 link 0: io port [1000, ffffff] [ 0.270677] TOM: 0000000040000000 aka 1024M [ 0.270677] node 0 link 0: mmio [e0000000, efffffff] [ 0.270677] node 0 link 0: mmio [a0000, bffff] [ 0.270677] node 0 link 0: mmio [40000000, fe0bffff] [ 0.270677] bus: [00,ff] on node 0 link 0 [ 0.270677] bus: 00 index 0 io port: [0, ffff] [ 0.270677] bus: 00 index 1 mmio: [40000000, fcffffffff] [ 0.270677] bus: 00 index 2 mmio: [a0000, bffff] [ 0.270677] ACPI: bus type pci registered [ 0.270677] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.270677] PCI: Not using MMCONFIG. [ 0.270677] PCI: Using configuration type 1 for base access [ 0.271162] bio: create slab at 0 [ 0.271162] ACPI: EC: Look up EC in DSDT [ 0.280856] ACPI: Interpreter enabled [ 0.280859] ACPI: (supports S0 S1 S3 S4 S5) [ 0.280883] ACPI: Using IOAPIC for interrupt routing [ 0.280935] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.285104] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.290515] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.297986] ACPI Warning: Incorrect checksum in table [OEMB] - C6, should be BD 20090521 tbutils-246 [ 0.298108] ACPI: No dock devices found. [ 0.298233] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.298455] pci 0000:00:01.1: reg 10 io port: [0xec00-0xec3f] [ 0.298466] pci 0000:00:01.1: reg 20 io port: [0x5000-0x503f] [ 0.298470] pci 0000:00:01.1: reg 24 io port: [0x6000-0x603f] [ 0.298489] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.298495] pci 0000:00:01.1: PME# disabled [ 0.298543] pci 0000:00:02.0: reg 10 32bit mmio: [0xdfefb000-0xdfefbfff] [ 0.298564] pci 0000:00:02.0: supports D1 D2 [ 0.298566] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.298569] pci 0000:00:02.0: PME# disabled [ 0.298591] pci 0000:00:02.1: reg 10 32bit mmio: [0xdfefac00-0xdfefacff] [ 0.298617] pci 0000:00:02.1: supports D1 D2 [ 0.298619] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.298622] pci 0000:00:02.1: PME# disabled [ 0.298682] pci 0000:00:05.0: reg 10 32bit mmio: [0xdfef4000-0xdfef7fff] [ 0.298707] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.298710] pci 0000:00:05.0: PME# disabled [ 0.298743] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf] [ 0.298777] pci 0000:00:07.0: reg 10 32bit mmio: [0xdfef9000-0xdfef9fff] [ 0.298781] pci 0000:00:07.0: reg 14 io port: [0xe480-0xe487] [ 0.298802] pci 0000:00:07.0: supports D1 D2 [ 0.298804] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.298808] pci 0000:00:07.0: PME# disabled [ 0.298829] pci 0000:00:08.0: reg 10 io port: [0xe400-0xe407] [ 0.298833] pci 0000:00:08.0: reg 14 io port: [0xe080-0xe083] [ 0.298837] pci 0000:00:08.0: reg 18 io port: [0xe000-0xe007] [ 0.298840] pci 0000:00:08.0: reg 1c io port: [0xdc00-0xdc03] [ 0.298844] pci 0000:00:08.0: reg 20 io port: [0xd880-0xd88f] [ 0.298848] pci 0000:00:08.0: reg 24 32bit mmio: [0xdfef8000-0xdfef8fff] [ 0.298894] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.298897] pci 0000:00:09.0: PME# disabled [ 0.298927] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.298930] pci 0000:00:0b.0: PME# disabled [ 0.298959] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.298962] pci 0000:00:0c.0: PME# disabled [ 0.298979] pci 0000:00:0d.0: reg 10 32bit mmio: [0xde000000-0xdeffffff] [ 0.298984] pci 0000:00:0d.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff] [ 0.298989] pci 0000:00:0d.0: reg 1c 64bit mmio: [0xdd000000-0xddffffff] [ 0.298993] pci 0000:00:0d.0: reg 30 32bit mmio: [0xdfec0000-0xdfedffff] [ 0.299109] pci 0000:01:0a.0: reg 10 32bit mmio: [0xdffff000-0xdfffffff] [ 0.299140] pci 0000:01:0a.0: PME# supported from D0 D1 D3hot D3cold [ 0.299143] pci 0000:01:0a.0: PME# disabled [ 0.299167] pci 0000:01:0a.1: reg 10 32bit mmio: [0xdfffe000-0xdfffefff] [ 0.299197] pci 0000:01:0a.1: PME# supported from D0 D1 D3hot D3cold [ 0.299200] pci 0000:01:0a.1: PME# disabled [ 0.299224] pci 0000:01:0a.2: reg 10 32bit mmio: [0xdfffd000-0xdfffdfff] [ 0.299254] pci 0000:01:0a.2: PME# supported from D0 D1 D3hot D3cold [ 0.299258] pci 0000:01:0a.2: PME# disabled [ 0.299285] pci 0000:01:0a.3: reg 10 32bit mmio: [0xdfffcc00-0xdfffccff] [ 0.299319] pci 0000:01:0a.3: PME# supported from D0 D3hot D3cold [ 0.299322] pci 0000:01:0a.3: PME# disabled [ 0.299351] pci 0000:00:04.0: transparent bridge [ 0.299355] pci 0000:00:04.0: bridge 32bit mmio: [0xdff00000-0xdfffffff] [ 0.299472] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.299656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.299749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 0.299810] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 0.299868] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.306734] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10 [ 0.306925] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11 [ 0.307116] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *5 [ 0.307306] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10 [ 0.307496] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 0.307686] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 0.307879] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.308069] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. [ 0.308258] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5 [ 0.308447] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 [ 0.308636] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11 [ 0.308826] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 [ 0.309015] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. [ 0.309205] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10 [ 0.309394] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.309584] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled. [ 0.309773] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.309962] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. [ 0.310205] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.310404] SCSI subsystem initialized [ 0.310468] libata version 3.00 loaded. [ 0.310468] usbcore: registered new interface driver usbfs [ 0.310468] usbcore: registered new interface driver hub [ 0.310468] usbcore: registered new device driver usb [ 0.310468] ACPI: WMI: Mapper loaded [ 0.310468] PCI: Using ACPI for IRQ routing [ 0.340010] Bluetooth: Core ver 2.15 [ 0.340028] NET: Registered protocol family 31 [ 0.340028] Bluetooth: HCI device and connection manager initialized [ 0.340028] Bluetooth: HCI socket layer initialized [ 0.340028] NetLabel: Initializing [ 0.340028] NetLabel: domain hash size = 128 [ 0.340028] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.340039] NetLabel: unlabeled traffic allowed by default [ 0.340187] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.340192] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.360021] Switched to high resolution mode on CPU 0 [ 0.360471] Switched to high resolution mode on CPU 1 [ 0.380022] pnp: PnP ACPI init [ 0.380045] ACPI: bus type pnp registered [ 0.385021] pnp: PnP ACPI: found 15 devices [ 0.385023] ACPI: ACPI bus type pnp unregistered [ 0.385037] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.385040] system 00:07: ioport range 0x800-0x80f has been reserved [ 0.385044] system 00:07: ioport range 0x4000-0x407f has been reserved [ 0.385047] system 00:07: ioport range 0x4080-0x40ff has been reserved [ 0.385050] system 00:07: ioport range 0x4400-0x447f has been reserved [ 0.385053] system 00:07: ioport range 0x4480-0x44ff has been reserved [ 0.385056] system 00:07: ioport range 0x4800-0x487f has been reserved [ 0.385059] system 00:07: ioport range 0x4880-0x48ff has been reserved [ 0.385063] system 00:07: ioport range 0x2000-0x207f has been reserved [ 0.385066] system 00:07: ioport range 0x2080-0x20ff has been reserved [ 0.385070] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 0.385074] system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved [ 0.385081] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.385085] system 00:07: iomem range 0xffb80000-0xffffffff could not be reserved [ 0.385092] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.385095] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.385101] system 00:0c: ioport range 0xa00-0xadf has been reserved [ 0.385104] system 00:0c: ioport range 0xae0-0xaef has been reserved [ 0.385109] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.385115] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.385118] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 0.385121] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.385125] system 00:0e: iomem range 0x100000-0x3fffffff could not be reserved [ 0.389822] AppArmor: AppArmor Filesystem Enabled [ 0.389856] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 [ 0.389859] pci 0000:00:04.0: IO window: disabled [ 0.389863] pci 0000:00:04.0: MEM window: 0xdff00000-0xdfffffff [ 0.389866] pci 0000:00:04.0: PREFETCH window: disabled [ 0.389869] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 [ 0.389871] pci 0000:00:09.0: IO window: disabled [ 0.389874] pci 0000:00:09.0: MEM window: disabled [ 0.389876] pci 0000:00:09.0: PREFETCH window: disabled [ 0.389879] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 [ 0.389881] pci 0000:00:0b.0: IO window: disabled [ 0.389884] pci 0000:00:0b.0: MEM window: disabled [ 0.389886] pci 0000:00:0b.0: PREFETCH window: disabled [ 0.389889] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 [ 0.389891] pci 0000:00:0c.0: IO window: disabled [ 0.389894] pci 0000:00:0c.0: MEM window: disabled [ 0.389896] pci 0000:00:0c.0: PREFETCH window: disabled [ 0.389905] pci 0000:00:04.0: setting latency timer to 64 [ 0.389910] pci 0000:00:09.0: setting latency timer to 64 [ 0.389915] pci 0000:00:0b.0: setting latency timer to 64 [ 0.389919] pci 0000:00:0c.0: setting latency timer to 64 [ 0.389923] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.389926] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.389929] pci_bus 0000:01: resource 1 mem: [0xdff00000-0xdfffffff] [ 0.389932] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.389935] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.389979] NET: Registered protocol family 2 [ 0.390128] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.390804] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.392381] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.393089] TCP: Hash tables configured (established 131072 bind 65536) [ 0.393092] TCP reno registered [ 0.393203] NET: Registered protocol family 1 [ 0.393280] Trying to unpack rootfs image as initramfs... [ 0.591716] Freeing initrd memory: 7929k freed [ 0.597296] Scanning for low memory corruption every 60 seconds [ 0.597455] audit: initializing netlink socket (disabled) [ 0.597473] type=2000 audit(1262428823.590:1): initialized [ 0.606478] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.607940] VFS: Disk quotas dquot_6.5.2 [ 0.607997] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.608646] fuse init (API version 7.12) [ 0.608728] msgmni has been set to 1870 [ 0.609007] alg: No test for stdrng (krng) [ 0.609035] io scheduler noop registered [ 0.609038] io scheduler anticipatory registered [ 0.609040] io scheduler deadline registered [ 0.609088] io scheduler cfq registered (default) [ 0.620085] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.620134] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.620193] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.620250] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.620312] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.620378] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.620448] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.620454] pci 0000:00:0d.0: Boot video device [ 0.620633] alloc irq_desc for 24 on node 0 [ 0.620635] alloc kstat_irqs on node 0 [ 0.620644] pcieport-driver 0000:00:09.0: irq 24 for MSI/MSI-X [ 0.620650] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 0.620764] alloc irq_desc for 25 on node 0 [ 0.620766] alloc kstat_irqs on node 0 [ 0.620770] pcieport-driver 0000:00:0b.0: irq 25 for MSI/MSI-X [ 0.620775] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 0.620873] alloc irq_desc for 26 on node 0 [ 0.620874] alloc kstat_irqs on node 0 [ 0.620880] pcieport-driver 0000:00:0c.0: irq 26 for MSI/MSI-X [ 0.620884] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 0.620953] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.620979] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.621108] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.621113] ACPI: Power Button [PWRF] [ 0.621171] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.621178] ACPI: Power Button [PWRB] [ 0.621469] processor LNXCPU:00: registered as cooling_device0 [ 0.621507] processor LNXCPU:01: registered as cooling_device1 [ 0.625853] Linux agpgart interface v0.103 [ 0.625865] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.625964] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.626195] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.627201] brd: module loaded [ 0.627623] loop: module loaded [ 0.627706] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.628007] sata_nv 0000:00:08.0: version 3.5 [ 0.628359] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 0.628364] alloc irq_desc for 23 on node 0 [ 0.628366] alloc kstat_irqs on node 0 [ 0.628378] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 0.628441] sata_nv 0000:00:08.0: setting latency timer to 64 [ 0.628523] scsi0 : sata_nv [ 0.628647] scsi1 : sata_nv [ 0.628782] ata1: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 23 [ 0.628786] ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 23 [ 0.628933] pata_amd 0000:00:06.0: version 0.4.1 [ 0.628971] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.629049] scsi2 : pata_amd [ 0.629124] scsi3 : pata_amd [ 0.630524] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.630527] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.631186] Fixed MDIO Bus: probed [ 0.631220] PPP generic driver version 2.4.2 [ 0.631344] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.631708] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 0.631714] alloc irq_desc for 22 on node 0 [ 0.631716] alloc kstat_irqs on node 0 [ 0.631726] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 0.631745] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.631749] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.631805] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.631838] ehci_hcd 0000:00:02.1: debug port 1 [ 0.631842] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.631863] ehci_hcd 0000:00:02.1: irq 22, io mem 0xdfefac00 [ 0.650013] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.650102] usb usb1: configuration #1 chosen from 1 choice [ 0.650137] hub 1-0:1.0: USB hub found [ 0.650145] hub 1-0:1.0: 8 ports detected [ 0.650644] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19 [ 0.650648] alloc irq_desc for 19 on node 0 [ 0.650650] alloc kstat_irqs on node 0 [ 0.650659] ehci_hcd 0000:01:0a.3: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19 [ 0.650675] ehci_hcd 0000:01:0a.3: EHCI Host Controller [ 0.650714] ehci_hcd 0000:01:0a.3: new USB bus registered, assigned bus number 2 [ 0.680021] ehci_hcd 0000:01:0a.3: debug port 1 [ 0.680044] ehci_hcd 0000:01:0a.3: irq 19, io mem 0xdfffcc00 [ 0.700016] ehci_hcd 0000:01:0a.3: USB 2.0 started, EHCI 1.00 [ 0.700079] usb usb2: configuration #1 chosen from 1 choice [ 0.700112] hub 2-0:1.0: USB hub found [ 0.700120] hub 2-0:1.0: 6 ports detected [ 0.700202] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.700570] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21 [ 0.700573] alloc irq_desc for 21 on node 0 [ 0.700575] alloc kstat_irqs on node 0 [ 0.700583] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21 [ 0.700595] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.700598] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.700635] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 0.700661] ohci_hcd 0000:00:02.0: irq 21, io mem 0xdfefb000 [ 0.762076] usb usb3: configuration #1 chosen from 1 choice [ 0.762110] hub 3-0:1.0: USB hub found [ 0.762119] hub 3-0:1.0: 8 ports detected [ 0.762534] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18 [ 0.762537] alloc irq_desc for 18 on node 0 [ 0.762538] alloc kstat_irqs on node 0 [ 0.762546] ohci_hcd 0000:01:0a.0: PCI INT B -> Link[LNKD] -> GSI 18 (level, low) -> IRQ 18 [ 0.762557] ohci_hcd 0000:01:0a.0: OHCI Host Controller [ 0.762592] ohci_hcd 0000:01:0a.0: new USB bus registered, assigned bus number 4 [ 0.762619] ohci_hcd 0000:01:0a.0: irq 18, io mem 0xdffff000 [ 0.782531] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.802932] ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S183A, SB02, max UDMA/33 [ 0.802943] ata1.00: applying bridge limits [ 0.803205] ata3.00: ATA-5: QUANTUM FIREBALLlct20 30, APL.0900, max UDMA/100 [ 0.803208] ata3.00: 58633344 sectors, multi 8: LBA [ 0.803231] ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:900:0x11) [ 0.803235] ata3.00: limited to UDMA/33 due to 40-wire cable [ 0.822084] usb usb4: configuration #1 chosen from 1 choice [ 0.822111] hub 4-0:1.0: USB hub found [ 0.822121] hub 4-0:1.0: 2 ports detected [ 0.822523] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 [ 0.822526] alloc irq_desc for 17 on node 0 [ 0.822528] alloc kstat_irqs on node 0 [ 0.822535] ohci_hcd 0000:01:0a.1: PCI INT C -> Link[LNKA] -> GSI 17 (level, low) -> IRQ 17 [ 0.822547] ohci_hcd 0000:01:0a.1: OHCI Host Controller [ 0.822587] ohci_hcd 0000:01:0a.1: new USB bus registered, assigned bus number 5 [ 0.822613] ohci_hcd 0000:01:0a.1: irq 17, io mem 0xdfffe000 [ 0.842821] ata1.00: configured for UDMA/33 [ 0.843227] ata3.00: configured for UDMA/33 [ 0.844116] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183A SB02 PQ: 0 ANSI: 5 [ 0.851059] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.851062] Uniform CD-ROM driver Revision: 3.20 [ 0.851165] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.851215] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.882082] usb usb5: configuration #1 chosen from 1 choice [ 0.882109] hub 5-0:1.0: USB hub found [ 0.882118] hub 5-0:1.0: 2 ports detected [ 0.882527] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16 [ 0.882530] alloc irq_desc for 16 on node 0 [ 0.882532] alloc kstat_irqs on node 0 [ 0.882540] ohci_hcd 0000:01:0a.2: PCI INT D -> Link[LNKB] -> GSI 16 (level, low) -> IRQ 16 [ 0.882554] ohci_hcd 0000:01:0a.2: OHCI Host Controller [ 0.882593] ohci_hcd 0000:01:0a.2: new USB bus registered, assigned bus number 6 [ 0.882629] ohci_hcd 0000:01:0a.2: irq 16, io mem 0xdfffd000 [ 0.942079] usb usb6: configuration #1 chosen from 1 choice [ 0.942106] hub 6-0:1.0: USB hub found [ 0.942116] hub 6-0:1.0: 2 ports detected [ 0.942179] uhci_hcd: USB Universal Host Controller Interface driver [ 0.942317] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.944482] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.944488] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.944564] mice: PS/2 mouse device common for all mice [ 0.944667] rtc_cmos 00:02: RTC can wake from S4 [ 0.944706] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.944743] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 0.944854] device-mapper: uevent: version 1.0.3 [ 0.944951] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.945039] device-mapper: multipath: version 1.1.0 loaded [ 0.945043] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.945247] cpuidle: using governor ladder [ 0.945249] cpuidle: using governor menu [ 0.945685] TCP cubic registered [ 0.945814] NET: Registered protocol family 10 [ 0.946252] lo: Disabled Privacy Extensions [ 0.946523] NET: Registered protocol family 17 [ 0.946545] Bluetooth: L2CAP ver 2.13 [ 0.946547] Bluetooth: L2CAP socket layer initialized [ 0.946550] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.946551] Bluetooth: SCO socket layer initialized [ 0.946587] Bluetooth: RFCOMM TTY layer initialized [ 0.946590] Bluetooth: RFCOMM socket layer initialized [ 0.946592] Bluetooth: RFCOMM ver 1.11 [ 0.946613] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ processors (2 cpu cores) (version 2.20.00) [ 0.946627] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 0.946629] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 0.946712] PM: Resume from disk failed. [ 0.946725] registered taskstats version 1 [ 0.946869] Magic number: 10:309:678 [ 0.946984] rtc_cmos 00:02: setting system clock to 2010-01-02 10:40:25 UTC (1262428825) [ 0.946987] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.946989] EDD information not available. [ 1.012537] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.050247] ata2.00: ATA-7: WDC WD1600AAJS-00PSA0, 05.06H05, max UDMA/133 [ 1.050250] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.091093] ata2.00: configured for UDMA/133 [ 1.091206] scsi 1:0:0:0: Direct-Access ATA WDC WD1600AAJS-0 05.0 PQ: 0 ANSI: 5 [ 1.091333] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.091372] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.091416] sd 1:0:0:0: [sda] Write Protect is off [ 1.091418] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.091440] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.091568] sda: [ 1.091705] scsi 2:0:0:0: Direct-Access ATA QUANTUM FIREBALL APL. PQ: 0 ANSI: 5 [ 1.091803] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.091836] sd 2:0:0:0: [sdb] 58633344 512-byte logical blocks: (30.0 GB/27.9 GiB) [ 1.091875] sd 2:0:0:0: [sdb] Write Protect is off [ 1.091877] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.091897] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.091995] sdb: [ 1.092087] ata4: port disabled. ignoring. [ 1.098826] sdb1 sdb2 < sda1 sda2 sda3 sda4 < sda5 > [ 1.122941] sdb5 > sdb3 sdb4 [ 1.123214] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.128772] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.128799] Freeing unused kernel memory: 660k freed [ 1.129197] Write protecting the kernel read-only data: 7584k [ 1.160042] usb 3-2: new low speed USB device using ohci_hcd and address 2 [ 1.280861] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.281250] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 1.281257] alloc irq_desc for 20 on node 0 [ 1.281259] alloc kstat_irqs on node 0 [ 1.281273] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20 [ 1.281279] forcedeth 0000:00:07.0: setting latency timer to 64 [ 1.323158] Floppy drive(s): fd0 is 1.44M [ 1.357561] FDC 0 is a post-1991 82077 [ 1.399126] usb 3-2: configuration #1 chosen from 1 choice [ 1.407772] usbcore: registered new interface driver hiddev [ 1.415392] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input3 [ 1.415470] generic-usb 0003:04F2:0116.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:02.0-2/input0 [ 1.415489] usbcore: registered new interface driver usbhid [ 1.415493] usbhid: v2.6:USB HID core driver [ 1.742525] usb 3-4: new low speed USB device using ohci_hcd and address 3 [ 1.811018] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:db:a5:06:89 [ 1.811023] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 1.980124] usb 3-4: configuration #1 chosen from 1 choice [ 1.993417] input: Microsoft Microsoft IntelliMouse® Explorer as /devices/pci0000:00/0000:00:02.0/usb3/3-4/3-4:1.0/input/input4 [ 1.993497] generic-usb 0003:045E:001E.0002: input,hidraw1: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:02.0-4/input0 [ 2.787977] xor: automatically using best checksumming function: generic_sse [ 2.832509] generic_sse: 6601.200 MB/sec [ 2.832512] xor: using function: generic_sse (6601.200 MB/sec) [ 2.835497] device-mapper: dm-raid45: initialized v0.2594b [ 3.210336] PM: Starting manual resume from disk [ 3.210342] PM: Resume from partition 8:1 [ 3.210344] PM: Checking hibernation image. [ 3.210542] PM: Resume from disk failed. [ 3.229270] EXT4-fs (sda3): barriers enabled [ 3.239262] kjournald2 starting: pid 426, dev sda3:8, commit interval 5 seconds [ 3.239289] EXT4-fs (sda3): delayed allocation enabled [ 3.239292] EXT4-fs: file extents enabled [ 3.245246] EXT4-fs: mballoc enabled [ 3.245263] EXT4-fs (sda3): mounted filesystem with ordered data mode [ 3.947681] type=1505 audit(1262428828.495:2): operation="profile_load" pid=449 name=/usr/share/gdm/guest-session/Xsession [ 3.955784] type=1505 audit(1262428828.505:3): operation="profile_load" pid=450 name=/sbin/dhclient3 [ 3.956071] type=1505 audit(1262428828.505:4): operation="profile_load" pid=450 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.956234] type=1505 audit(1262428828.505:5): operation="profile_load" pid=450 name=/usr/lib/connman/scripts/dhclient-script [ 4.005323] type=1505 audit(1262428828.555:6): operation="profile_load" pid=451 name=/usr/bin/evince [ 4.010161] type=1505 audit(1262428828.555:7): operation="profile_load" pid=451 name=/usr/bin/evince-previewer [ 4.013141] type=1505 audit(1262428828.565:8): operation="profile_load" pid=451 name=/usr/bin/evince-thumbnailer [ 4.063694] type=1505 audit(1262428828.615:9): operation="profile_load" pid=453 name=/usr/lib/cups/backend/cups-pdf [ 4.064053] type=1505 audit(1262428828.615:10): operation="profile_load" pid=453 name=/usr/sbin/cupsd [ 13.142292] Adding 3044308k swap on /dev/sda1. Priority:-1 extents:1 across:3044308k [ 13.144978] udev: starting version 147 [ 13.199056] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 13.199079] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000 [ 13.212066] EDAC MC: Ver: 2.1.0 Dec 8 2009 [ 13.213989] EDAC amd64_edac: Ver: 3.2.0 Dec 8 2009 [ 13.214076] EDAC amd64: This node reports that Memory ECC is currently disabled. [ 13.214080] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled [ 13.214083] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. [ 13.214084] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. [ 13.214085] Might be a BIOS bug, if BIOS says ECC is enabled [ 13.214087] Use of the override can cause unknown side effects. [ 13.214116] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 13.405084] nvidia: module license 'NVIDIA' taints kernel. [ 13.405090] Disabling lock debugging due to kernel taint [ 13.670093] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 13.702596] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 23 [ 13.702606] nvidia 0000:00:0d.0: PCI INT A -> Link[LMC9] -> GSI 23 (level, low) -> IRQ 23 [ 13.702612] nvidia 0000:00:0d.0: setting latency timer to 64 [ 13.702905] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009 [ 13.708310] ip_tables: (C) 2000-2006 Netfilter Core Team [ 13.731973] lp: driver loaded but no devices found [ 13.734349] nf_conntrack version 0.5.0 (7678 buckets, 30712 max) [ 13.734639] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 13.734642] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 13.734644] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 13.777204] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 13.838673] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 13.838682] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22 [ 13.838729] HDA Intel 0000:00:05.0: setting latency timer to 64 [ 15.300017] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 15.340096] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5 [ 41.403959] EXT4-fs (sda3): internal journal on sda3:8 [ 41.498306] kjournald starting. Commit interval 5 seconds [ 41.498855] EXT3 FS on sda2, internal journal [ 41.498860] EXT3-fs: mounted filesystem with writeback data mode. [ 41.584061] alloc irq_desc for 27 on node 0 [ 41.584067] alloc kstat_irqs on node 0 [ 41.584078] forcedeth 0000:00:07.0: irq 27 for MSI/MSI-X [ 41.584268] eth0: no link during initialization. [ 41.584812] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 41.622121] __ratelimit: 6 callbacks suppressed [ 41.622127] type=1505 audit(1262428866.165:13): operation="profile_replace" pid=1221 name=/usr/share/gdm/guest-session/Xsession [ 41.624212] type=1505 audit(1262428866.175:14): operation="profile_replace" pid=1222 name=/sbin/dhclient3 [ 41.624503] type=1505 audit(1262428866.175:15): operation="profile_replace" pid=1222 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 41.624668] type=1505 audit(1262428866.175:16): operation="profile_replace" pid=1222 name=/usr/lib/connman/scripts/dhclient-script [ 41.629713] type=1505 audit(1262428866.175:17): operation="profile_replace" pid=1223 name=/usr/bin/evince [ 41.634651] type=1505 audit(1262428866.185:18): operation="profile_replace" pid=1223 name=/usr/bin/evince-previewer [ 41.637614] type=1505 audit(1262428866.185:19): operation="profile_replace" pid=1223 name=/usr/bin/evince-thumbnailer [ 41.667281] type=1505 audit(1262428866.215:20): operation="profile_replace" pid=1230 name=/usr/lib/cups/backend/cups-pdf [ 41.667637] type=1505 audit(1262428866.215:21): operation="profile_replace" pid=1230 name=/usr/sbin/cupsd [ 41.674868] type=1505 audit(1262428866.225:22): operation="profile_replace" pid=1233 name=/usr/sbin/ntpd [ 41.936153] usplash:378 freeing invalid memtype ffffffffc0000000-ffffffffc4000000 [ 43.260376] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 43.260380] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance [ 43.260382] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 43.260383] vboxdrv: the usage of hardware performance counters by [ 43.260385] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 43.260389] vboxdrv: Found 2 processor cores. [ 43.260453] VBoxDrv: dbg - g_abExecMemory=ffffffffa0c16280 [ 43.260470] vboxdrv: fAsync=1 offMin=0x129b5 offMax=0x129b5 [ 43.260532] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. [ 43.260534] vboxdrv: Successfully loaded version 3.1.2 (interface 0x00100001). [ 43.610752] ppdev: user-space parallel port driver [ 305.868662] EXT4-fs (sda5): barriers enabled [ 305.884762] kjournald2 starting: pid 2850, dev sda5:8, commit interval 5 seconds [ 305.885012] EXT4-fs (sda5): internal journal on sda5:8 [ 305.885016] EXT4-fs (sda5): delayed allocation enabled [ 305.885019] EXT4-fs: file extents enabled [ 305.885197] EXT4-fs: mballoc enabled [ 305.885215] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 371.840266] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success) [ 371.840274] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost [ 371.840277] EXT4-fs: mballoc: 0 generated and it took 0 [ 371.840279] EXT4-fs: mballoc: 0 preallocated, 0 discarded [ 386.326182] kjournald starting. Commit interval 5 seconds [ 386.326198] EXT3-fs warning: checktime reached, running e2fsck is recommended [ 386.326421] EXT3 FS on sdb1, internal journal [ 386.326426] EXT3-fs: mounted filesystem with writeback data mode. [ 387.565224] kjournald starting. Commit interval 5 seconds [ 387.565235] EXT3-fs warning: checktime reached, running e2fsck is recommended [ 387.565430] EXT3 FS on sdb3, internal journal [ 387.565435] EXT3-fs: mounted filesystem with writeback data mode. [ 404.396010] kjournald starting. Commit interval 5 seconds [ 404.396030] EXT3-fs warning: checktime reached, running e2fsck is recommended [ 404.396332] EXT3 FS on sdb4, internal journal [ 404.396337] EXT3-fs: mounted filesystem with writeback data mode. [ 549.682619] EXT4-fs (sdb1): barriers enabled [ 549.722567] kjournald2 starting: pid 4029, dev sdb1:8, commit interval 5 seconds [ 549.742544] EXT4-fs (sdb1): internal journal on sdb1:8 [ 549.742553] EXT4-fs (sdb1): delayed allocation enabled [ 549.742557] EXT4-fs: file extents enabled [ 549.747301] EXT4-fs: mballoc enabled [ 549.747320] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 734.581611] eth0: link up. [ 734.582050] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 745.570014] eth0: no IPv6 routers present [ 2122.552537] usb 2-3: new high speed USB device using ehci_hcd and address 2 [ 2122.633194] hub 2-0:1.0: unable to enumerate USB device on port 3 [ 2126.272534] usb 2-3: new high speed USB device using ehci_hcd and address 3 [ 2126.426128] usb 2-3: configuration #1 chosen from 2 choices [ 2126.854653] Initializing USB Mass Storage driver... [ 2126.854836] scsi4 : SCSI emulation for USB Mass Storage devices [ 2126.854984] usbcore: registered new interface driver usb-storage [ 2126.854988] USB Mass Storage support registered. [ 2126.855379] usb-storage: device found at 3 [ 2126.855381] usb-storage: waiting for device to settle before scanning [ 2131.850482] usb-storage: device scan complete [ 2131.851182] scsi 4:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0 [ 2131.851656] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 2131.856800] sd 4:0:0:0: [sdc] Adjusting the sector count from its reported value: 3999744 [ 2131.856808] sd 4:0:0:0: [sdc] 3999743 512-byte logical blocks: (2.04 GB/1.90 GiB) [ 2131.858289] sd 4:0:0:0: [sdc] Write Protect is off [ 2131.858293] sd 4:0:0:0: [sdc] Mode Sense: 68 00 00 08 [ 2131.858296] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 2131.860536] sd 4:0:0:0: [sdc] Adjusting the sector count from its reported value: 3999744 [ 2131.862033] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 2131.862037] sdc: sdc1 sdc2 [ 2131.865288] sd 4:0:0:0: [sdc] Adjusting the sector count from its reported value: 3999744 [ 2131.867036] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 2131.867040] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 2136.312213] sd 4:0:0:0: [sdc] Unhandled sense code [ 2136.312218] sd 4:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2136.312222] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 2136.312227] Info fld=0x0 [ 2136.312229] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 2136.312234] end_request: I/O error, dev sdc, sector 160639 [ 2136.312239] __ratelimit: 3 callbacks suppressed [ 2136.312242] Buffer I/O error on device sdc1, logical block 160576 [ 2136.312246] Buffer I/O error on device sdc1, logical block 160577 [ 2136.312249] Buffer I/O error on device sdc1, logical block 160578 [ 2136.312252] Buffer I/O error on device sdc1, logical block 160579 [ 2136.312255] Buffer I/O error on device sdc1, logical block 160580 [ 2136.312258] Buffer I/O error on device sdc1, logical block 160581 [ 2136.312260] Buffer I/O error on device sdc1, logical block 160582 [ 2136.312263] Buffer I/O error on device sdc1, logical block 160583 [ 2136.332217] sd 4:0:0:0: [sdc] Unhandled sense code [ 2136.332222] sd 4:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2136.332226] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 2136.332231] Info fld=0x0 [ 2136.332232] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 2136.332237] end_request: I/O error, dev sdc, sector 160639 [ 2136.332243] Buffer I/O error on device sdc1, logical block 160576 [ 2136.332248] Buffer I/O error on device sdc1, logical block 160577 [ 2136.704831] sd 4:0:0:0: [sdc] Unhandled sense code [ 2136.704837] sd 4:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2136.704841] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 2136.704846] Info fld=0x0 [ 2136.704847] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 2136.704852] end_request: I/O error, dev sdc, sector 160639 [ 2136.710473] sd 4:0:0:0: [sdc] Unhandled sense code [ 2136.710478] sd 4:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 2136.710482] sd 4:0:0:0: [sdc] Sense Key : Medium Error [current] [ 2136.710486] Info fld=0x0 [ 2136.710487] sd 4:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 2136.710492] end_request: I/O error, dev sdc, sector 160639 [ 2483.891036] end_request: I/O error, dev fd0, sector 0 [ 2496.028584] end_request: I/O error, dev fd0, sector 0 [ 2496.028593] __ratelimit: 22 callbacks suppressed [ 2496.028596] Buffer I/O error on device fd0, logical block 0 [ 2496.708897] nautilus[5915]: segfault at 7f686d0b3770 ip 00007f686d0b3770 sp 00007fff9b1e81b8 error 14 in libgioremote-volume-monitor.so[7f686dc20000+13000] [ 2508.121331] end_request: I/O error, dev fd0, sector 0 [ 2508.121341] Buffer I/O error on device fd0, logical block 0 [ 2520.201082] end_request: I/O error, dev fd0, sector 0 [ 3862.824903] usb 2-3: USB disconnect, address 3 [ 3862.825170] FAT: bread failed in fat_clusters_flush [ 3862.825288] FAT: bread failed in fat_clusters_flush [ 3862.825542] FAT: bread failed in fat_clusters_flush [ 3864.653240] FAT: bread failed in fat_clusters_flush [ 3864.653391] FAT: bread failed in fat_clusters_flush [ 3864.653407] FAT: bread failed in fat_clusters_flush [ 3870.072523] usb 2-3: new high speed USB device using ehci_hcd and address 4 [ 3870.152538] hub 2-0:1.0: unable to enumerate USB device on port 3 [ 3873.912530] usb 2-3: new high speed USB device using ehci_hcd and address 5 [ 3874.066118] usb 2-3: configuration #1 chosen from 2 choices [ 3874.067130] scsi5 : SCSI emulation for USB Mass Storage devices [ 3874.067229] usb-storage: device found at 5 [ 3874.067234] usb-storage: waiting for device to settle before scanning [ 3879.060816] usb-storage: device scan complete [ 3879.061581] scsi 5:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0 [ 3879.062039] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 3879.066379] sd 5:0:0:0: [sdc] Adjusting the sector count from its reported value: 3999744 [ 3879.066388] sd 5:0:0:0: [sdc] 3999743 512-byte logical blocks: (2.04 GB/1.90 GiB) [ 3879.068582] sd 5:0:0:0: [sdc] Write Protect is off [ 3879.068590] sd 5:0:0:0: [sdc] Mode Sense: 68 00 00 08 [ 3879.068594] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 3879.071576] sd 5:0:0:0: [sdc] Adjusting the sector count from its reported value: 3999744 [ 3879.072834] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 3879.072845] sdc: sdc1 sdc2 [ 3879.077086] sd 5:0:0:0: [sdc] Adjusting the sector count from its reported value: 3999744 [ 3879.078815] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 3879.078822] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ 3884.754119] sd 5:0:0:0: [sdc] Unhandled sense code [ 3884.754126] sd 5:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3884.754129] sd 5:0:0:0: [sdc] Sense Key : Medium Error [current] [ 3884.754134] Info fld=0x0 [ 3884.754136] sd 5:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 3884.754141] end_request: I/O error, dev sdc, sector 160639 [ 3884.754148] Buffer I/O error on device sdc1, logical block 160576 [ 3884.754153] Buffer I/O error on device sdc1, logical block 160577 [ 3884.754156] Buffer I/O error on device sdc1, logical block 160578 [ 3884.754158] Buffer I/O error on device sdc1, logical block 160579 [ 3884.754161] Buffer I/O error on device sdc1, logical block 160580 [ 3884.754164] Buffer I/O error on device sdc1, logical block 160581 [ 3884.754167] Buffer I/O error on device sdc1, logical block 160582 [ 3884.754169] Buffer I/O error on device sdc1, logical block 160583 [ 3884.772733] sd 5:0:0:0: [sdc] Unhandled sense code [ 3884.772739] sd 5:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3884.772743] sd 5:0:0:0: [sdc] Sense Key : Medium Error [current] [ 3884.772748] Info fld=0x0 [ 3884.772749] sd 5:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 3884.772754] end_request: I/O error, dev sdc, sector 160639 [ 3884.772760] Buffer I/O error on device sdc1, logical block 160576 [ 3884.875099] sd 5:0:0:0: [sdc] Unhandled sense code [ 3884.875105] sd 5:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3884.875109] sd 5:0:0:0: [sdc] Sense Key : Medium Error [current] [ 3884.875114] Info fld=0x0 [ 3884.875116] sd 5:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 3884.875121] end_request: I/O error, dev sdc, sector 160639 [ 3884.880708] sd 5:0:0:0: [sdc] Unhandled sense code [ 3884.880710] sd 5:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3884.880713] sd 5:0:0:0: [sdc] Sense Key : Medium Error [current] [ 3884.880716] Info fld=0x0 [ 3884.880717] sd 5:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 3884.880721] end_request: I/O error, dev sdc, sector 160639 [ 6342.769570] sdc: detected capacity change from 2047868416 to 0 [ 6363.446528] usb 2-3: USB disconnect, address 5 [ 6370.822529] usb 2-3: new high speed USB device using ehci_hcd and address 6 [ 6370.902594] hub 2-0:1.0: unable to enumerate USB device on port 3 [ 6374.172534] usb 2-3: new high speed USB device using ehci_hcd and address 7 [ 6374.330863] usb 2-3: configuration #1 chosen from 1 choice [ 6374.332849] scsi6 : SCSI emulation for USB Mass Storage devices [ 6374.333063] usb-storage: device found at 7 [ 6374.333065] usb-storage: waiting for device to settle before scanning [ 6374.337112] input: Rockbox.org Rockbox media player as /devices/pci0000:00/0000:00:04.0/0000:01:0a.3/usb2/2-3/2-3:1.1/input/input6 [ 6374.337232] generic-usb 0003:05AC:120A.0003: input,hidraw2: USB HID v1.10 Keyboard [Rockbox.org Rockbox media player] on usb-0000:01:0a.3-3/input1 [ 6379.331355] usb-storage: device scan complete [ 6379.333457] scsi 6:0:0:0: Direct-Access SST55LD0 19K-45-C-MWE ADBA PQ: 0 ANSI: 4 [ 6379.334049] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 6379.340329] sd 6:0:0:0: [sdc] Adjusting the sector count from its reported value: 3999744 [ 6379.340339] sd 6:0:0:0: [sdc] 3999743 512-byte logical blocks: (2.04 GB/1.90 GiB) [ 6379.342441] sd 6:0:0:0: [sdc] Write Protect is off [ 6379.342446] sd 6:0:0:0: [sdc] Mode Sense: 0b 00 00 08 [ 6379.342449] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 6379.351678] sd 6:0:0:0: [sdc] Adjusting the sector count from its reported value: 3999744 [ 6379.353675] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 6379.353681] sdc: sdc1 sdc2 [ 6379.361680] sd 6:0:0:0: [sdc] Adjusting the sector count from its reported value: 3999744 [ 6379.363801] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 6379.363806] sd 6:0:0:0: [sdc] Attached SCSI removable disk