CrossCompiler < Main

Downloads

release

dev builds

extras

themes

Documentation

manual

wiki

device status

Support

forums

mailing lists

IRC

Development

bugs

patches

dev guide

Donate

Wiki > Main > RockboxDevelopment > CrossCompiler

---+!! Building a cross compiler

%TOC%

---+ Step 1: Gather information

---++ Host environment
In this example it will be assumed that you are running Linux with the bash shell (or cygwin). We will only build the C compiler along with the assembler, linker and stuff. Note that the procedure is exactly the same if you are running cygwin on Windows, and on Macintosh OS X.

---++ Find your target CPU

The Archos Jukebox and Ondio models have an SH-1 CPU, so the target name is *sh-elf*.

The iriver H-xxx, iAudio X5 and M5 models have a Coldfire CPU, so the target name is *m68k-elf*.

The iPod, iriver IFP-7x0, iriver H10, m:robe, Sansa e200/c200/fuze/clip, D2, YH-xxx and Gigabeat F/X/S builds have ARM cores, so the target name is *arm-elf-eabi*.

---

---+ Step 2a: Automatic build
---++ rockboxdev.sh
In the tools/ directory of your checked out Rockbox source code, there's this shell script called *rockboxdev.sh* that will perform the cross-compiler installation for you fully automatically.

When run, it will first prompt you for what architecture to build for, and then it'll proceed to download, unpack, build and install both binutils and the proper gcc version for you. If necessary it will even patch gcc accordingly.

All compilers are installed to /usr/local/bin, which is usually in your PATH already. If it isn't, add it to the .bashrc file in your home directory.

When using this script, you do not need to follow the rest of this instruction below this point. That is only for pure manual installation.

*Note for Ubuntu users: you will need build-essential and texinfo installed: sudo apt-get install build-essential texinfo*

*Note for Cygwin users: the script may take up to 6-8 hours to complete, depending on your CPU*

*Note for systems that have /tmp in ram: change the temp path at the top of rockboxdev.sh to avoid running out of space*

Below is a list of stuff that must be installed before starting:
   * gcc
   * make
   * patch
   * perl
   * zip
   * gawk
   * bison
   * flex
   * automake
   * libtool
   * curl
for arm-app (Samsung ypr0) only:
   * subversion
   * libncurses5-dev

---

---+ Step 2b: Manual build

Note that the automatic build using rockboxdev.sh is *strongly recommended*. If automatic building doesn't work, ask for help on the forums or raise a bug.

*Note*: These manual instructions describe how to build the SH-1 cross compiler (sh-elf). To build a ColdFire, or ARM compiler, substitute *sh-elf* with your target name from above in the --target parameter, and use another path in the --prefix parameter as well.

Instructions here might be %RED%<strong>obsolete</strong>%BLACK%.%ENDCOLOR%%ENDCOLOR% as nobody does it manually really.
---++ Download the toolchain source code

You will need the following archives:

| *Target* | *binutils* | *gcc* |
| *Coldfire (m68k-elf)* | 2.16.1 ([[http://ftp.gnu.org/gnu/binutils/ download]], [[http://gcc.gnu.org/mirrors.html][mirrors]], [[http://sources.redhat.com/binutils/ info]]) | 3.4.6 ([[http://ftp.gnu.org/gnu/gcc/ download]], [[http://gcc.gnu.org/mirrors.html mirrors]], [[http://www.gnu.org/software/gcc/ info]]) |
| *ARM (arm-elf)* | 2.16.1 ([[http://ftp.gnu.org/gnu/binutils/ download]], [[http://gcc.gnu.org/mirrors.html][mirrors]], [[http://sources.redhat.com/binutils/ info]]) | 4.0.3 ([[http://ftp.gnu.org/gnu/gcc/ download]], [[http://gcc.gnu.org/mirrors.html mirrors]], [[http://www.gnu.org/software/gcc/ info]]) |
| *SH (sh-elf)* | 2.16.1 ([[http://ftp.gnu.org/gnu/binutils/ download]], [[http://gcc.gnu.org/mirrors.html][mirrors]], [[http://sources.redhat.com/binutils/ info]]) | 4.0.3 ([[http://ftp.gnu.org/gnu/gcc/ download]], [[http://gcc.gnu.org/mirrors.html mirrors]], [[http://www.gnu.org/software/gcc/ info]]) |
| *Mips (mipsel-elf)* | 2.17.1 ([[http://ftp.gnu.org/gnu/binutils/ download]], [[http://gcc.gnu.org/mirrors.html][mirrors]], [[http://sources.redhat.com/binutils/ info]]) | 4.1.2 ([[http://ftp.gnu.org/gnu/gcc/ download]], [[http://gcc.gnu.org/mirrors.html mirrors]], [[http://www.gnu.org/software/gcc/ info]]) |

(optional) gdb-6.6.tar.bz2 ([[http://ftp.gnu.org/gnu/gdb download]], [[http://gcc.gnu.org/mirrors.html mirrors]], [[http://www.gnu.org/software/gdb/ info]])

*Note:* We know that there are newer versions of gcc/binutils available. See the last paragraph in this document.

---++ Download any required patches for your host and target

| *Host* | *Target* | *Patch* | *Comments* |
| All | sh-elf | [[http://www.rockbox.org/gcc/gcc-4.0.3-rockbox-1.diff][gcc-4.0.3-rockbox-1.diff]] | |
| Cygwin & Mac OS X | m68k-elf | [[http://www.rockbox.org/gcc/gcc-3.4.6.patch][gcc-3.4.6.patch]] | |
| Linux AMD64 | m68k-elf | [[http://www.rockbox.org/gcc/gcc-3.4.6-amd64.patch][gcc-3.4.6-amd64.patch]] | |
| All | arm-elf | [[http://www.rockbox.org/gcc/rockbox-multilibs-arm-elf-gcc-4.0.3.diff][rockbox-multilibs-arm-elf-gcc-4.0.3.diff]] | Enables multilibs for Thumb and different ARM architectures. |

NOTE: rockboxdev.sh downloads these patches automatically - you do not need to download them separately if you're running rockboxdev.sh

---++ Target-specific notes:

---+++ Coldfire (iAudio, iRiver)

*Note*: For better (read: smaller) code, apply the patch gcc-3.4.6-rockbox-2.diff below. It changes how gcc selects between using multiplication and shift-and-add for some calculations. (It is a bit of a hack, because it affects more target CPU models than it should. Not a problem as long as you only use the compiler for Rockbox development.) - MagnusHolmgren

---++ Host specific notes
   * Binutils needs flex installed in order to compile. On Mandrake I did urpmi flex
   * Binutils require gettext, bison, and m4 installed to compile (urpmi gettext, urpmi bison, and urpmi m4 on Mandrake, apt-get install gettext and bison and m4 on Debian)

---++ (OS X) start the bash shell
<verbatim>
   [Linus-Computer:~] linus% bash</verbatim>

---++ Unpack the archives

(some may need to get the sources off CVS servers, as noted above)

<verbatim>
   /home/linus> tar xvjf binutils-2.16.1.tar.bz2
   /home/linus> tar xvjf gcc-core-4.0.3.tar.bz2
   /home/linus> tar xvjf gdb-6.6.tar.bz2</verbatim>

Apply patches if necessary (see the table above)
<verbatim>
   /home/linus> patch -p0 <gcc-4.0.3-rockbox-1.diff</verbatim>

---++ Create the build tree

<verbatim>
   /home/linus> mkdir build
   /home/linus> cd build
   /home/linus/build> mkdir binutils
   /home/linus/build> mkdir gcc
   /home/linus/build> mkdir gdb</verbatim>

---++ Choose installed location

Now is the time to decide where you want the tools to be installed. This is the directory where all binaries, libraries, man pages and stuff end up when you do "make install".

In this example I have chosen "/home/linus/sh1" as my installation directory, or prefix as it is called. Feel free to use any prefix, like /usr/local/sh1 for example.

---++ Build binutils

We will start with building the binutils (the assembler, linker and stuff). This is pretty straightforward. We will be installing the whole tool chain in the /home/linus/sh1 directory.

If you are building on a Macintosh OS X machine, you have to disable the precompiled headers:
<verbatim>
   /home/linus> export CC="gcc -no-cpp-precomp"</verbatim> Then configure, make and install: <verbatim>
   /home/linus> cd build/binutils
   /home/linus/build/binutils> ../../binutils-2.16.1/configure --target=sh-elf --prefix=/home/linus/sh1
   /home/linus/build/binutils> make
   /home/linus/build/binutils> make install</verbatim>

---++ Build GCC

Now you are ready to build GCC. To do this, you must have the newly built binutils in the PATH.

Then set the PATH, configure and make:
<verbatim>
   /home/linus> export PATH=/home/linus/sh1/bin:$PATH
   /home/linus> cd build/gcc
   /home/linus/build/gcc> ../../gcc-4.0.3/configure --target=sh-elf --prefix=/home/linus/sh1 --enable-languages=c
   /home/linus/build/gcc> make
   /home/linus/build/gcc> make install</verbatim>

---++ Build GDB

If you are planning to debug your code with GDB, you have to build it as well.

<verbatim>
   /home/linus> cd build/gdb
   /home/linus/build/gdb> ../../gdb-6.6/configure --target=sh-elf --prefix=/home/linus/sh1
   /home/linus/build/gdb> make
   /home/linus/build/gdb> make install</verbatim>

NOTE: If you are using GNU/Linux Ubuntu 8.10, you need to add the option "--disable-werror" to configure, like this:
<verbatim>
   /home/linus/build/gdb> ../../gdb-6.6/configure --target=sh-elf --prefix=/home/linus/sh1 --disable-werror</verbatim>

---+++ (Debian) Termcap dependency problems

If you're using a Debian-based distribution, you may run into problems with termcap dependencies (see http://packages.debian.org/stable/oldlibs/termcap-compat).

A workaround for this is to build termcap libs before building GDB:

   * Download termcap 1.3.1 from ftp://ftp.gnu.org/pub/pub/gnu/termcap/
   * Configure, compile and install into the local build environment:
<verbatim>
   /home/linus> tar zxvf termcap-1.3.1.tar.gz
   /home/linus> cd termcap-1.3.1
   /home/linus/termcap-1.3.1> ./configure --prefix=/home/linus/sh1
   /home/linus/termcap-1.3.1> make
   /home/linus/termcap-1.3.1> make install</verbatim> The final step did produce errors as it tried to remove existing header files from /usr/include, so beware, and don't run as root.

Now go ahead and make GDB.

Done

If someone up there likes you, you now have a working tool chain.

Good luck!

_Linus_

---++ Why don't you use version X.Y.Z of the compiler?
Because the versions we use now works. We upgrade when it becomes necessary. Here's a small summary of some other versions we have tried:

   * GCC 3.4.6 does not build iRiver targets when binutils-2.17 is installed. Therefore we don't use it.
   * GCC 4.0.x seems to work fine when building Rockbox for Coldfire platforms. For the time being, it is not the recommended or preferred version to use. It should generate valid binaries, though, but it is quite untested. Some codecs might fail to build due to the fact that 4.0.x generates larger code, and sometimes crashes are observed.
   * GCC 4.1.0 is not able to build Rockbox correctly (it currently fails on some inline assembly and with the Tremor codec). You may also experience problems during the 4.1.0 cross compiler build; if so using the option "--enable-libssp=no" during configure should help.

I	Attachment	Action	Size	Date	Who	Comment
diff	gcc-3.3.6-rockbox-1.diff	manage	1.7 K	11 Jul 2006 - 21:12	JensArnold	Gcc 3.3.6 patch, fixes SH builds with -O2 / -Os
patch	gcc-3.4.4.patch	manage	0.6 K	11 Jul 2006 - 21:12	JensArnold	Patch for failed cygwin coldfire builds (gcc 3.4.4
patch	gcc-3.4.6-amd64-subst.patch	manage	0.8 K	26 Sep 2006 - 19:12	JensArnold	Patch for building m68k-elf-gcc 3.4.6 on AMD64 (somewhat hackish)
patch	gcc-3.4.6-amd64.patch	manage	1.2 K	29 Jun 2007 - 09:42	BjornStenberg	Backport of the patch for GCC bug 28911. It fixes cross compiler build for m68k-elf on x86_64 hosts.
diff	gcc-3.4.6-rockbox-1.diff	manage	1.7 K	11 Jul 2006 - 21:12	JensArnold	Gcc 3.4.6 patch, fixes SH builds with -O2 / -Os
diff	gcc-3.4.6-rockbox-2.diff	manage	1.4 K	04 Jun 2007 - 20:50	MagnusHolmgren	Gcc 3.4.6 patch. Improves code generation. Does not include gcc-3.4.6-rockbox-1.diff.
patch	gcc-3.4.6.patch	manage	0.6 K	10 Aug 2006 - 22:38	BarryWardell	Patch for failed macos m68k builds (gcc-3.4.6)
diff	gcc-4.0.3-rockbox-1.diff	manage	1.7 K	11 Jul 2006 - 21:12	JensArnold	Gcc 4.0.3 patch, fixes SH builds with -O2 / -Os
patch	gcc.patch	manage	0.4 K	11 Jul 2006 - 21:12	LinusNielsenFeltzing	Patch for failed cygwin Coldfire builds
patch	rockboxdev-3.patch	manage	0.8 K	10 Aug 2006 - 23:08	BarryWardell	Patch for failed macos m68k builds (gcc-3.4.6)

r104 - 22 Mar 2013 - 06:57:12 - PatrickRobertson

Parents: RockboxDevelopment