Samsung YP-R1 Port Page

This port is intended to make rockbox work as an "hybrid" application, that runs on linux, but must control lot's of HW parameters by itself
Do NOT think as this port being something like an application for Android. It's the only application running on the device at a time...
Basically I will resume my port to YP-R0 to R1, since basic hardware is the same (CPU; linux environment...)

Hardware

• CPU: IMX37 532 MHz
• 3 RTC (why the hell): S-35392A - MX37 integrated - Bluetooth/FM controller
• Power management: MAX8819 & MAX17040
• Audio codec: WM1808
• Radio SI4709
• LCD: 400x240 16 bit [Two possible LCD types: /* 0=> casio, 1=> SMD */]
• TV output! [needs a switch with a gpio, uses imx37 tv out capability]
• Bluetooth / Other stuff: BCM2070CB0KUFBXG?
• Input: 3 buttons (VolUP?/VolDown/PowerOn) + touch screen (capacitive) + reset button
• Touchscreen controller: Melpas MCS5000
• Traces of USB otg (indeed CPU has full support, but on R0 some tests by VanniX failed. Needs care)

Recovery

To enter recovery mode hold RESET button, then hold power button for ~5 seconds. You will see the IMX37 Blank SE Marley device. I will provide a lsusb of it.

Pins and I/O

TODO

-- LorenzoMiori? - 16 Jan 2013