release
dev builds
extras
themes manual
wiki
device status forums
mailing lists
IRC bugs
patches
dev guide



Search | Go
Wiki > Main > SanDisk > SansaE200Port > SansaE200Unbrick > SansaC200Erase (r3)

Sansa C200 Erase

Introduction

This page describes a Linux-only method for completely erasing the C200's disk. This is useful when the recovery instructions described on SansaE200Unbrick fail to recover your device.

Instructions

Note: Following these instructions will erase all data on your device . %W%

  • Put your C200 in manufacturing mode (the same mode used with e200tool) and then run e200tool with the correct .bin file, e.g. "sudo ./e200tool recover c240erase.bin" or "sudo ./e200tool recover c250erase.bin"

  • This uploads and runs some code on your C200. This can take 45 minutes or more. You should see progress information on the screen.

  • When the erase is complete, it will prompt you to press a button to shutdown. Do as you're told. You may need to release hold first.

  • In the original firmware, reformat the flash (Format is in the Settings menu)
Edit | Attach | Print version | History: r6 | r4 < r3 < r2 < r1 | Backlinks | View wiki text | More topic actions...
r3 - 02 Nov 2008 - 22:28:18 - MichaelChicoine
Copyright by the contributing authors.