Rockbox is considered Stable on the Fuze v1, but not on the Fuze v2.
For details and bootloader installation see SansaAMS
page explains the firmware file details needed for porting of Rockbox to Sansa v2 models.
A growing collection of extracted firmware files can be found at Daniel's Sansa Series v2 Firmwares
SanDisk Sansa e200 v2, c200 v2, m200 (v2), clip and Fuze
Pictures of the Fuze-Player
Pictures of the inside of the Fuze can be found here:
The following components can be distinguished:
- Sandisk 20-99-00112-2, an SoC based on the AMS AS3525 (datasheet)
- Si4702 FM chip, markings 0219 C430 741
- Lithium battery, looks similar to the one in the Clip (which is most likely from ATL). Markings + 3.7V- / 354239 / A76804 / 207481.
- ESMT M12L64164A-7T memory chip, connected to a Primecell PL172 memory controller in the SoC
- Sandisk S80118642 SDTNLLBHSM-4096 CP0098614, flash chip. Some pins on the package seem to be marked on the silkscreen layer, similar to the Clip.
- Display, backside is marked with 54_53_04625 / T1A_ 080409 (or TiA_ 080409) while the latter six digits are likely to be a date (mine had Ti_A 080718)
Sansafix at the Sansa forums has announced that a v2 of the Fuze has been released. There are no noticeable differences, but there is a different firmware version that is incompatible with V1 Fuze firmwares.
The v2 devices are in the wild. Attached are photos of the upper side of the board
and the underside
- Sandisk 20-82-00196-4 / S837 -792009 / SA0342-8, an SoC based on the as3525
- Si4702 FM chip, markings 0219 / CCW8 / 834, indicating an Si4702 with firmware version 19
- Sandisk S84518794 / SDTNLLCHSM-8192 / DP0031075AR flash chip, some pins are marked on the silkscreen layer
- 24MHz crystal
- cylindrical crystal, possibly 32768 Hz (for RTC or FM radio)
Copyright © by the contributing authors.