release
dev builds
extras
themes manual
wiki
device status forums
mailing lists
IRC bugs
patches
dev guide



Wiki > Main > AtmtMP170Port (compare)

Difference: AtmtMP170Port (r2 vs. r1)

ATMT MP170 1GB DAB/MP3 player

Introduction

As suspected, this appears to be very similar if not identical to the Logic Dax.

Photos

Hardware

  • Telechips TCC773L? CPU - ARM946E?-S CPU Core (4KB Cache, up to 120MHz)
  • Kwang Sung Electronics ARBP-8 DAB Module - contains an Integrant Technologies ITD3020 tuner and Telechips TCC320 decoder. This DAB module is only capable of receiving Band 3 (174-240MHz) broadcasts, not Band L (1452-1492MHz)
  • LCD module (seems to have an SSD1815 controller). Has the following markings:
      R G  M1-RGB  B
      0YOOO1B-38-AO2
  • Samsung K9K8G08U0A? 1GB NAND Flash

Differences with the Logic Dax

  • assembled_thumb.jpg:
    assembled_thumb.jpg

None of these seem to me to be of any importance, but for completeness:

  • DAB_back_thumb.jpg:
    DAB_back_thumb.jpg

DAB module is KSM-AEBP000S-800 6255 00-D-0PbF and not KSM-AEBP000S-800 6184 D-0PbF. It also does not appear to have an antenna. I'm not currently is a DAB Band III country so I can't test reception. Board version is 3306 instead of 2106

  • DAB_front_thumb.jpg:
    DAB_front_thumb.jpg

LCD is 0YOOO1B-38-AO2 and not 0YOOO1B-38-MO2

  • main_back_thumb.jpg:
    main_back_thumb.jpg

Flash is K9K8G08U0A? and not K9K8G08U0M?. Board version is 3506 cf. 1906.

  • main_front_thumb.jpg:
    main_front_thumb.jpg

USB

  • NAND_back_thumb.jpg:
    NAND_back_thumb.jpg

Conecting to USB without the NAND board attached gives the following in lsusb:

  • NAND_front_thumb.jpg:
    NAND_front_thumb.jpg
Bus 005 Device 009: ID 140e:b021
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x140e
  idProduct          0xb021
  bcdDevice            1.00
  iManufacturer           0
  iProduct                0
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
cannot read device status, Operation not permitted (1)

r4 - 14 Jun 2008 - 22:56:51 - AlexParker

Revision r2 - 14 Jun 2008 - 20:37 - AlexParker
Revision r1 - 14 Jun 2008 - 20:10 - AlexParker
Copyright by the contributing authors.