Wiki > Main > CreativeZENXFiPort (compare)
Difference: CreativeZENXFiPort (r7 vs. r6)
This port is still unstable, use it at your own risks. Please read the important notes !!
This port shares most of its code with the CreativeZENPort, refer to this one for cross check or if it is out of date.
* I have found charging does work in both bootloader (Version V1Beta2?) and Rockbox (Version -131217). Whether this is defined behaviour, I don't know. Chrisjj
There are some issues with sharing disk space with the OF. See CreativeZENPort for more details.
The OF cannot power off properly, you need to reset to actually power off and reboot to rockbox. See CreativeZENPort for more details.
Hold the "back" button while powering on to boot to the OF. See CreativeZENPort for more details.
The bootloader can be built using three different methods. The recommend one is the automatic method using RockboxUtility when it's available. The semi-automatic method requires a working cross-compiler and a copy of the Rockbox source code.
See CreativeZENPort. It is the same procedure except for a few points:
When the bootloader is built, you have to install it. Note that installing the bootloader is only required once (or on bootloader updates, which are pretty rare). To update rockbox itself, you don't have to do this. You will need to format the device after the bootloader installation, as described in the next section.
Very Important: in order to perform the upgrade, first turn off your device and then boot into recovery mode by holding the play button on boot. It will show a menu in which you should select "Reload firmware" and confirm. After having erased the firmware, you can proceed below.
RockboxUtility should be able to do that in the future.
An alternative method under Windows is to repack the bootloader in the installer using the zentools and use the installer normally. This has not been tested yet.
See CreativeZENPort, this is exactly the same procedure but using the bootloader for the X-Fi.
Rockbox and Creative OS do not use the same file system so one cannot use both at the same time. In order to run Rockbox, you will need to reformat the internal storage as FAT. If you want to restore the Creative OS, you will need to reformat it using the recovery mode. It is strongly advised to put music on the SD card since the internal storage handling might change in the future and require formatting once again.
Download the first package found here. Copy the contents of this .ZIP file to the device.
-- AmauryPouly - 11 Nov 2013
r10 - 26 Jan 2016 - 22:52:00 - MichaelGiacomelliRevision r7 - 08 Jan 2014 - 14:59 - ChrisJordan
Revision r6 - 21 Dec 2013 - 03:29 - ChrisJordan
Copyright © by the contributing authors.