Philips GoGear HDD16x0 & HDD63x0 Series
The Philips GoGear HDD16x0 and HDD63x0 series of DAPs are different devices internally (except SoC and the codec). The HDD16x0 has a 6GB microdrive and a 128x128x16 LCD, whereas the HDD63x0 has a 30GB 1.8" hard drive and a 220x176x16 LCD. The touchpad is also different between the two. The service manual for each one is available here http://www.free-service-manuals.com/. There are three known models of the HDD16x0 series: the HDD1630, the HDD1620, and the HDD1635. The major differences between the HDD1620 and HDD1630 is the inclusion of an FM radio tuner on the HDD1630. Little information is known about the HDD1635.
Mark Arigo committed code for the HDD1630 to SVN on 2008-06-27, and additional code to branch the HDD6330 off into its own port on 2009-12-25.
- Dual boot functionality is implemented; press the MENU button (or Vol+ for HDD63X0) while booting to boot into the OF.
- Audio playback and most core functionality is working.
- Both devices have full use of the touchpad and all buttons.
- Plugins are enabled on both devices.
Here is what's needed for both ports:
- FM radio detection is not implemented for the HDD16x0 series.
- Battery readings are not very accurate.
- SST39WF400A "Silicon Storage Technology, Inc. :: 4 Mbit (x16) Multi-Purpose Flash"
- HDD1630: 32M - Samsung K4S56163PF or Hynix HY5V56F or equivalent (4M X 16bit X 4 banks)
- HDD6330: 64M - Samsung K4S51163PF or equivalent (8M X 16bit X 4 banks mobile SDRAM)
- HDD1630: 1.5" 128x128 - LP-9165-2
- HDD6330: 1.9" 220x176
- LCD Controller
- HDD1630: Leadis Technology LDS176 (132x132 4k) or LDS186 (128x160 64k) (based on the registers found in the OF disassembly).
- HD connector has the markings "PWA-ARIZONA_HDD_FPC_EMI" on the ribbon cable
("Arizona" is the code name of the HDD6330. "Phoenix" is the code name of the HDD1630.)
This trick will allow you to connect either the HDD16x0 or HDD63x0 to your computer as a UMS device.
- Connect the player to the PC.
- On the player, press and hold "Power On" & "Vol +" until the unit resets.
- Quickly press and hold "Vol -" until the PC picks up the unit and shows it as removable drive.
- A video explaining this procedure can be found here : http://video.google.com/videoplay?docid=-349256814975105076
Installation steps for HDD63x0
We recommend using Rockbox Utility to install Rockbox on the HDD63x0 series. The following steps are for those who wish to install Rockbox manually.
- Boot the GoGear into UMS mode as descibed above. This makes the device show up as a Mass Storage Device when attached to your PC.
- Extract the rockbox-gogearhdd6330.zip file onto the root of your player, this creates a .rockbox folder on the device.
- On the GoGear, rename \System\FWimage.ebn /System/FWimage.ebn to OF.ebn and copy the FWImage.ebn you downloaded from the above link into \System\ the /System folder on your GoGear.
- Disconnect your device from your computer. It should reboot and launch Rockbox.
Installation steps for HDD16x0
We recommend using Rockbox Utility to install Rockbox on the HDD16x0 series. The following steps are for those who wish to install Rockbox manually.
Boot the GoGear into UMS mode as descibed above. This makes the device show up as a Mass Storage Device when attached to your PC.
Download and extract a build to your player: http://build.rockbox.org/data/rockbox-gogearhdd1630.zip
Download the bootloader: http://download.rockbox.org/bootloader/gogear/hdd1630/FWImage.ebn
Extract the rockbox-gogearhdd1630.zip onto the root of your player, this creates a .rockbox folder on the device.
On the GoGear, rename \System\FWimage.ebn /System/FWimage.ebn to OF.ebn and copy the FWImage.ebn you downloaded from the above link into the \System\ /System folder on your GoGear.
Disconnect your device from your computer. It should reboot and launch Rockbox.
CategoryFrontpage: Philips GoGear HDD16X0/63X0 Port Index [New Ports]
Copyright © by the contributing authors.