release
dev builds
extras
themes manual
wiki
device status forums
mailing lists
IRC bugs
patches
dev guide



Wiki > Main > IAudioX5PortPins (compare)

Difference: IAudioX5PortPins (r2 vs. r1)

iAudio X5 Port Pin Assignments

GPIO

Port pinI/O/FDescription
0 I PCF50606 IRQ
1    
2    
3 O KEEPACT (0 = power off)
4 I O CY7C68310? BUSPWRD (1 = bus powered)
5 I ATA IRQ
6    
7    
8    
9    
10 I/O PCF50606 I2C? SCL
11    
12    
13 I/O Remote Data
14 O Remote CLK
15 O Remote CS
16    
17    
18    
19    
20    
21 O Remote backlight
22 I/O DS2411 serial I/O
23 O CY7C68310? RESET
24 I Remote detect (0 = present)
25 I Remote PLAY/ON button (0 = on)
26 I ON button (0 = on)
27 I Hold switch (0 = on)
28 F CS1 - (A15,A14 selects LCD or USBOTG: 10=LCD 01=USBOTG)
29 O Audio mux (0=FM Tuner, 1=Line-In)
30 O ATA Reset
31 F ATA DIOR

GPIO1

Port pinI/O/FDescription
32 O ATA DIOW
33 I ATA IORDY
34    
35 O CY7C68310? USB enable (0 = on)
36 O LCD reset (0 = reset)
37 O Remote RS
38 F SDRAM WE
39 F SDRAM CAS
40 F SDRAM BCLK
41 I/O TLV320 & DA202 I2C? SCL
42 I/O TLV320 & DA202 I2C? SDA
43 O ATA Bus enable (0 = enable)
44 I/O PCF50606 I2C? SDA
45    
46    
47    
48    
49    
50    
51    
52 F SDRAM LDQM
53 F SDRAM UDQM
54 I maybe USBOTG detect
55 I USB connected (1 = connected)
56 I Charger detect (1 = connected)
57 I CY7C68310? LOWPWR (1 = Only 100mA granted)
58    
59 F SDRAM RAS
60 F SDRAM CS
61    
62    
63 F SDRAM BCLKE

"*" indicates that this GPIO or function is actually implemented by two pins on the physical package -- one dedicated input pin and one dedicated output. This means that this logical bit can serve two functions simultaneously. There's only one bit that decides function vs. GPIO, so the composite pin must either both be function pins or a GPI and GPO pin.

PCF50606 GPO

Port pinDescription
GPO0  
GPO1 Main LCD Backlight
GPOOD0 Green LED (0 = on)
GPOOD1 Red LED (0 = on)
GPOOD2  
GPOOD3 HDD power (0 = on)

Subpack Connector

Port pinDescription
1 USB Pin 5 (Ground)
2 USB Pin 5 (Ground)
3 USB Pin 3 (Data +)
4 USB Pin 3 (Data +)
5 USB Pin 2 (Data -)
6 USB Pin 2 (Data -)
7 USB Pin 1 (+5V)
8 USB Pin 1 (+5V)
9 No Connection
10 Line-In/Line-Out ground
11 Line-In/Line-Out ground
12 No Connection
13 Line-Out Right Channel
14 Line-Out Left Channel
15 Line-In Right Channel
16 Line-In Left Channel
17 No Connection
18 Power Sleeve (Ground)
19 Power Sleeve (Ground)
20 No Connection
21 Power (+5V)
22 Power (+5V)

X5_ConnectorPins_LineOut.gif

To make it clear how I labeled the pins

Mini AB Connector (USB OTG)

Port pinDescription
1 USB Pin 1 (+5V)
2 USB Pin 2 (Data -)
3 USB Pin 3 (Data +)
4 USB Pin 4 (No Connection)
5 USB Pin 5 (Ground)

r2 - 19 Mar 2010 - 22:14:42 - JensArnold

Revision r2 - 19 Mar 2010 - 22:14 - JensArnold
Revision r1 - 08 Nov 2008 - 22:10 - MichaelSevakis
Copyright by the contributing authors.