Wiki > Main > IriverBoot (compare)
Difference: IriverBoot (r200 vs. r199)
- THIS IS NOT THE INSTALLATION INSTRUCTIONS PAGE.
WARNING 1! The bootloader is still in development. If it malfunctions, you may not be able to restore the flash contents, and your player will be rendered USELESS!. You use Rockbox at your own risk! By installing Rockbox, you agree that Rockbox and its developers are not responsible for any damage to your player or loss of manufacturer's warranty that may result.
Be careful! Do NOT attempt to build your own bootloader from SVN unless you know for sure what you're doing.
NOTE: this page applies only for H100 and H300 series! For Iriver H10 see IriverH10Port.
None of these URLs work anymore. Consider using the mirror link below instead!
If the one you need doesn't work, you could try this page which has most of the above mirrored. You should try and get it from iriver first though. Both for your safety, and for the site's bandwidth's sake.
Once you have unzipped the firmware file, you should have a file called "ihp_120.hex" (H120/140), "ihp_100.hex" (H110/115) or "H300.hex" (H320/340).
You need to download the appropriate bootloader.bin that fits your model. It's at the bottom of this page.
H110 or H115:
$ tools/descramble -iriver ihp_100.hex ihp_100.bin
H120 or H140:
$ tools/descramble -iriver ihp_120.hex ihp_120.bin
H320 or H340:
$ tools/descramble -iriver H300.hex H300.bin
H110 or H115:
$ tools/mkboot ihp_100.bin bootloader/bootloader.bin new.bin
H120 or H140:
$ tools/mkboot ihp_120.bin bootloader/bootloader.bin new.bin
H320 or H340:
$ tools/mkboot -h300 H300.bin bootloader/bootloader.bin new.bin
$ tools/scramble -iriver new.bin new.hex
If you used fwpatcher or fwpatchernu, these are already checked by the patcher.
Copy the hex file you patched in Step 2 to the root of the iriver hard drive and make sure it is called "ihp_120.hex" (H120/140) , "ihp_100.hex" (H110/115) or "H300.hex" (H320/340).
$ mount /mnt/iriver $ cp new.hex /mnt/iriver/ihp_120.hex $ umount /mnt/iriver
Follow the normal iriver firmware upgrade procedure (details are given below). Once completed, you should have a boot loader that tries to load Rockbox from disk whenever you start the player.
iriver Firmware Upgrade procedure:
Once this is completed, when you now start your player up you should initially see a screen saying 'Rockbox Bootloader' at the top before the normal Iriver boot screen appears.
You have now successfully installed the bootloader and are ready to install Rockbox itself.
NOTE: You must now install the Rockbox files on your iriver, or it will simply boot the iriver firmware - see the manual for instructions on how to do this.
When you have installed Rockbox on your player, you will now be able to choose which firmware you want to use each time you turn on your player.
H100: To start the original Iriver firmware, hold the record button down and press Play. To start the Rockbox firmware, simply press Play on its own. H300: Hold the Record button, and press Play/On. Continue holding both until you see a message telling you that it is starting the original firmware. Then, you may release Record but continue holding Play/On. The iRiver firmware detects if Play/On is pressed when it starts, and if it isn't being pressed shuts itself down.
Note: When starting the original firmware from the remote with the main unit Hold switch on, you will need to hold the Play button until the iriver firmware has started. Otherwise you will get a "hold" message from the original firmware.
MatthiasM?: Bootloader v2: make sure that you have only one primary harddisk partition with FAT32 at your H3x0! Otherwise the Rockbox bootloader works but fails to load Rockbox itself.
AlexanderSpyridakis: There is a serious Bootloader issue for many users. It seems that for some poeple the USB Bootloader mode failes to work. While the unit confirms that it is in a USB Bootloader mode the computer fails to recognise the device (not OS related). While normal USB detection works (within the firmware) if someone encounters the USB Bootloader failure, then the user has to wait for the player to boot up and wait for the disc to go to idle mode before inserting the USB cable again. Of course there is no problem, USB related, in default iriver firmware. Any ideas?
This is fixed in SVN now. -- SteveBavin - 19 Apr 2007
KevinFerrare: Since the beginning of the rockbox port on the H1x0 series, I've always got an "*Panic* ata:-32" error with vanilla bootloaders. The only solution I've found so far is to replace the content of the "check_registers" function in "firmware/drivers/ata.c" by a "return 0;", compile the bootloader, cross my fingers and flash it
DavideGentile: On CFModded H1x0 targets USB disk mode does not exit gracefully. Target throws a "ATA error: -80" and a reset is subsequently required.
r201 - 30 Sep 2013 - 20:43:41 - LorenzoMiori?Revision r200 - 05 Aug 2009 - 07:54 - BertrikSikken
Revision r199 - 10 Dec 2008 - 22:28 - DavideGentile
Copyright © by the contributing authors.