Wiki > Main > IriverH10FAQ (compare)
Difference: IriverH10FAQ (r6 vs. r5)
On The H10 there is currently no dual-boot feature. This may get a fully functioning dual boot port. If implemented in the future. To go back to the iriver firmware you need followed to rename the original bootloader back directions contained in to its original name (and remove / rename the Rockbox bootloader) manual you should have no problems booting into the original firmware. Simply hold the "cancel" button while booting to get into the original firmware.
Unfortunetly, upon booting into the original firmware, the "Music" folder will be hidden. If Rockbox is set to show "supported," any hidden folders will not show up. Solutions are:
To clear the settings enable the hold switch after starting Rockbox but before the Rockbox logo appears. This will clear all your user settings and revert to safe defaults. In case your player is unusable, try this first.
To uninstall Rockbox, delete the rockbox.h10 file and the folder .rockbox. called .rockbox from the root of your drive. Then rename the original bootloader file (you file, OF.mi4, hopefully backuped upon installation) back to its original name, after removing thus overwriting / renaming the Rockbox bootloader. other .mi4 file.
Currently the FM tuner isn't supported. It will be in the future.
The H10 port is in its' early stages and hasn't been optimized for speed yet. The simplest solution is to choose a WPS without peakmeters, for example iCatcher. Higher bitrate MP3s especially have these problems, as well as higher bitrate AAC files. This is because there is still quite a bit of optimization to be done on the H10 During the decoding of some files, the one core used is at nearly full capacity, which is why you may notice slowness in the menus or adjusting volume. If you have replaygain or equalizer settings enabled, turning them off may improve your playback quality. As well, using a simpler WPS, preferably one without images, may also help considerably.
Recording hasn't has been implemented implemented. yet. Please be go patient. here for more information
r8 - 05 Feb 2008 - 03:49:48 - MarcGuayRevision r6 - 07 May 2007 - 21:10 - NathanHepting
Revision r5 - 17 Nov 2006 - 10:13 - LinusNielsenFeltzing
Copyright © by the contributing authors.