dev builds
themes manual
device status forums
mailing lists
IRC bugs
dev guide

Wiki > Main > IriverX20Port (compare)

Difference: IriverX20Port (r2 vs. r1)

Rockbox on the iriver X20


This page is for gathering information for a Rockbox port to the iriver X20.

PCB Scans

  Front PCB


  Back PCB


    The images above are resized to 50%. Click on them for full size or PM me (keenox) on the forums for higher res.

USB Mode

You can boot in USB Mode by shorting the pins tagged with USB/NAND. I think it's some kind of switch between USB and NAND boot modes. You will need the Telechips or the tcctool drivers. You need to modify the .inf files by adding the TCC82x chip using VID=140E and PID=B051.

  Telechips FWDN tool inf

%USB\VID_140E&PID_B051.DeviceDesc%=VTCDRV.Dev, USB\VID_140E&PID_B051

USB\VID_4102&PID_1032.DeviceDesc="Telechips TCC82xx VTC USB Driver"

  tcctool inf

"TCC82x usb-boot mode"=LIBUSB_DEV, USB\VID_140E&PID_B051

"TCC82x usb-boot mode"=LIBUSB_DEV, USB\VID_140E&PID_B051

"TCC82x usb-boot mode"=LIBUSB_DEV, USB\VID_140E&PID_B051

These are examples only. I didn't post the entire .inf files.

-- RaduCoriu - 06 Jun 2008

r2 - 06 Jun 2008 - 13:15:05 - RaduCoriu

Revision r2 - 06 Jun 2008 - 13:15 - RaduCoriu
Revision r1 - 04 Jun 2008 - 17:52 - RobertMenes
Copyright by the contributing authors.