Wiki > Main > OlympusMR100Info (compare)
Difference: OlympusMR100Info (r8 vs. r7)
Larger image: (1112x2112, 5.57 MB)
See OlympusMR100HardwareComponents for chip info.
Larger image: (1152x2090, 4.41 MB)
This is front of the LCD. On the connector ribbon is printed:
TSE2399FPC-11 04-52 TRULY-1
Truly Semiconductor makes four 128x160 LCDs: http://www.trulysemi.com/eng/prod.asp?typeID=30&search=no
This is back of the LCD. You can see the 4 red LEDs.
Behind the LCD is a casing that evenly distributes the LED lighting for the LCD. There's a reflective sheet stuck on the back of this case on which is printed "P-TG2399 (PBF433)" and a date.
Larger image: (1060x1015, 2.41 MB)
J1 is the connector to the main board.
There are 7 red LEDs labeled D1-D7.
A plastic frame that fits over the board has been removed. This frame contains elements that distribute the led light evenly over each button opening (and maybe is required for touch detection).
Synaptics documentation: http://www.synaptics.com/support/dev_support.cfm
r8 - 10 Dec 2008 - 21:56:48 - NicolasPennequinRevision r8 - 10 Dec 2008 - 21:56 - NicolasPennequin
Revision r7 - 12 Jan 2008 - 14:28 - RobertKukla
Copyright © by the contributing authors.