Difference: SamsungR1Port (r4 vs. r3)

Samsung YP-R1 Port Page

Samsung YP-R1 Port Page

This port is intended to make rockbox work as an "hybrid" application, that runs on linux, but must control lot's of HW parameters by itself Do NOT think as this port being something like an application for Android. It's the only application running on the device at a time... Basically I will resume my port to YP-R0 to R1, since basic hardware is the same (CPU; linux environment...)

Hardware

CPU: IMX37 532 MHz
3 RTC (why the hell): S-35392A - MX37 integrated - Bluetooth/FM controller
Power management: MAX8819 & MAX17040
Audio codec: WM1808
Radio SI4709
LCD: 400x240 16 bit [Two possible LCD types: /* 0=> casio, 1=> SMD */]
TV output! [needs a switch with a gpio, uses imx37 tv out capability]
Bluetooth / FM radio / Other stuff: BCM2070CB0KUFBXG?
Input: 3 buttons (VolUP?/VolDown/PowerOn) + touch screen (capacitive) + reset button
Touchscreen controller: Melpas MCS5000
Traces of USB otg (indeed CPU has full support, but on R0 some tests by VanniX failed. Needs care)

Recovery

To enter recovery mode hold RESET button, then hold power button for ~5 seconds. You will see the IMX37 Blank SE Marley device. I will provide a lsusb of it.

Pins and I/O

TODO

-- LorenzoMiori? - 16 Jan 2013

View topic | View difference side by side | History: r13 < r12 < r11 < r10 | More topic actions

r13 - 08 Feb 2013 - 21:00:35 - LorenzoMiori?

Revision r4 - 18 Jan 2013 - 23:05 - LorenzoMiori?
Revision r3 - 18 Jan 2013 - 20:11 - LorenzoMiori?