Wiki > Main > SansaE200Install (compare)
Difference: SansaE200Install (r29 vs. r28)
To go into the original firmware, turn on your Sansa while holding down "
The sansapatcher tool has detected that you have previously installed Rockbox using the old installation method. In order to continue, you first need to restore the original SanDisk firmware to your Sansa. This can be achieved in either of the following ways:
a) Using the SanDisk Firmware Updater
Download the SanDisk Firmware Updater and run it. It should guide you through installing the latest Sandisk firmware on your Sansa.
If you have a SanDisk PP5022.mi4 file with the SanDisk firmware in it, just put it into the root directory of your Sansa. If your Sansa is running version 1.03 or above of the SanDisk firmware you will need to rename this file to firmware.mi4. Now unplug the USB cable and make sure to start back up into the SanDisk firmware again (by holding |<< if you have the Rockbox bootloader currently installed). It should give a message saying that it is upgrading the firmware.
If you don't have the original mi4 firmware around, try getting one from: http://daniel.haxx.se/sansa/mi4.html
Once you have done so, you can go back and complete the bootloader installation.
r29 - 16 Feb 2008 - 20:00:29 - MarcGuayRevision r29 - 16 Feb 2008 - 20:00 - MarcGuay
Revision r28 - 21 Oct 2007 - 19:51 - RowanPestille
Copyright © by the contributing authors.