Wiki > Main > SansaE200Port (compare)
Difference: SansaE200Port (r79 vs. r78)
This page is not for the v2 models. The v1 firmware is named 01.xx.xx, while the v2 firmware begins with 03. This version number can be retrieved under Settings->Info. Look under Settings->Info - if Version has the format 01.xx.xx, the unit is a v1. All other indicators, such as markings on the casing or packaging, are unreliable due to SanDisk's practice of using the same values on different models.
Frequently asked questions about Rockbox for the Sansa series can be found here.
More information here. If the USB options on your player are "MSC" and "MTP" it's non-R, if they're "Rhapsody" and "Plays for Sure" then it's R.
There is a working bootloader that can load and run Rockbox or the original firmware. To go into the original firmware, turn on your Sansa while holding down the left button (
There are currently simulators for all Rockbox compatible devices. A simulator can be useful for seeing what Rockbox looks and feels like before installing as well as testing out your homemade themes before putting them on your player. The e200 simulator is here.
There is a working emulator for the e200 posted on Flyspray. It currently boots Rockbox and decodes MP3, as well as the retail bootloader, however it does not yet load the retail firmware because it supports only one CPU core. See here.
There's a ROM accessible via i2c on the target that we casually call the i2c ROM. It seems to contain the pre-boot loader that loads the BL.rom bootloader from the secret partition off the NAND flash and starts it.
CategoryFrontpage: Sandisk Sansa e200 and e200R port index [Ports]
r79 - 02 May 2010 - 02:15:40 - ChrisJordanRevision r79 - 02 May 2010 - 02:15 - ChrisJordan
Revision r78 - 13 Apr 2010 - 01:07 - RafaelCarre
Copyright © by the contributing authors.