|
|
Wiki > Main > SansaFuze (compare)
| ||||||||||||||||||||
Difference: SansaFuze (r33 vs. r32)SanDisk Sansa FuzeCurrent StatusRockbox is considered stable Stable on the Fuze v1, but v1 and not on the Fuze v2. For details and bootloader installation see SansaAMS FirmwareThe SansaAMSFirmware page explains the firmware file details needed for porting of Rockbox to Sansa v2 models. A growing collection of extracted firmware files can be found at Daniel's Sansa Series v2 Firmwares Forum ThreadSanDisk Sansa e200 v2, c200 v2, m200 (v2), clip and Fuze HardwarePictures of the Fuze-PlayerPictures of the inside of the Fuze can be found here:
Components (Fuze V1)The following components can be distinguished:
Fuze v2Sansafix at the Sansa forums has announced that a v2 of the Fuze has been released. There are no noticeable EXTERNAL differences, but there is a different firmware version that is incompatible with V1 Fuze firmwares. Please note that all ram on the V2 fuze is inside the CPU package so its total ram cannot be upgraded. Also note that the board layout of the Fuze V2 is very different from that of the Fuze V1, although many parts (LCD, controls, headphone jack, power switch, etc) can be swapped between the two models in case yours is in need of repair. The v2 devices are in the wild. Attached are photos of the upper side of the board and the underside. Components:
r34 - 29 Jun 2011 - 12:24:39 - AlexandrosSchillings?
Revision r33 - 31 Oct 2010 - 20:24 - MichaelGiacomelliRevision r32 - 07 Oct 2010 - 22:09 - JohnRomero Copyright © by the contributing authors.
|