Microsoft Windows NT version 5.0 (Build 2195) Service Pack 4.0 USBCommandVerifier.dll ver 1.3.0.3 TestServices.dll ver 1.3.0.3 StackSwitcher.dll ver 1.3.0.3 Now Starting Test:Device Descriptor Test (Configuration Index 0) Get configuration failed (1.1.2) Devices must support being set to Addressed/Configured state. Stopping Test [ Device Descriptor Test (Configuration Index 0): Number of: Fails (1); Aborts (0); Warnings (0) ] Now Starting Test:Device Descriptor Test (Configuration Index 0) Get configuration failed Device descriptor length : 12 Device descriptor type : 1 Major version : 2 Minor version : 0 Each interface specifies its own device class type Device sub class : 0 Device protocol : 0 Device MaxPacketSize0 : 40 Create file on 'usb.if' failed Failed to get vendor information for VendorID : ffff Device ProductID : 1 Device BCD : 0 Device Manufacturer String : 0 Device Product String : 0 Device Serial Number String : 0 Number of configurations device supports : 1 Stopping Test [ Device Descriptor Test (Configuration Index 0): Number of: Fails (0); Aborts (1); Warnings (1) ] Now Starting Test:Configuration Descriptor Test (Configuration Index 0) Get configuration failed (1.1.2) Devices must support being set to Addressed/Configured state. Stopping Test [ Configuration Descriptor Test (Configuration Index 0): Number of: Fails (1); Aborts (0); Warnings (0) ] Now Starting Test:Configuration Descriptor Test (Configuration Index 0) Get configuration failed Number of interface descriptors found 1 Number of alternate interface descriptors found : 0 Number of endpoint descriptors found : 2 Configuration descriptor length : 9 Configuration descriptor type : 2 Configuration descriptor TotalLength : 20 Configuration descriptor NumInterfaces : 1 Configuration descriptor ConfigurationValue: 1 Configuration descriptor string descriptor index : 0 Configuration descriptor bmAttributes : c0 Device does not support remote wake up Maximum power device requires : 2mA Device is BUS/SELF-POWERED Device is currently BUS POWERED Currently remote wakeup is DISABLED Stopping Test [ Configuration Descriptor Test (Configuration Index 0): Number of: Fails (0); Aborts (0); Warnings (0) ] Now Starting Test:Interface Descriptor Test (Configuration Index 0) Get configuration failed (1.1.2) Devices must support being set to Addressed/Configured state. Stopping Test [ Interface Descriptor Test (Configuration Index 0): Number of: Fails (1); Aborts (0); Warnings (0) ] Now Starting Test:Endpoint Descriptor Test (Configuration Index 0) Get configuration failed (1.1.2) Devices must support being set to Addressed/Configured state. Stopping Test [ Endpoint Descriptor Test (Configuration Index 0): Number of: Fails (1); Aborts (0); Warnings (0) ] Now Starting Test:Endpoint Descriptor Test (Configuration Index 0) Get configuration failed Testing Interface number : 0 Alternate setting : 0 Endpoint descriptor length : 7 Endpoint descriptor type : 5 Endpoint Type : Bulk, Number : 1, Direction : IN Endpoint descriptor bmAttributes : 2 Endpoint descriptor raw MaxPacketSize : 200 Endpoint descriptor interval : 0 Endpoint descriptor length : 7 Endpoint descriptor type : 5 Endpoint Type : Bulk, Number : 1, Direction : OUT Endpoint descriptor bmAttributes : 2 Endpoint descriptor raw MaxPacketSize : 200 Endpoint descriptor interval : 0 Stopping Test [ Endpoint Descriptor Test (Configuration Index 0): Number of: Fails (0); Aborts (0); Warnings (0) ] Now Starting Test:Halt Endpoint Test (Configuration Index 0) Get configuration failed (1.1.2) Devices must support being set to Addressed/Configured state. Stopping Test [ Halt Endpoint Test (Configuration Index 0): Number of: Fails (1); Aborts (0); Warnings (0) ] Now Starting Test:SetConfiguration Test (Configuration Index 0) Get configuration failed (1.1.2) Devices must support being set to Addressed/Configured state. Stopping Test [ SetConfiguration Test (Configuration Index 0): Number of: Fails (1); Aborts (0); Warnings (0) ] Now Starting Test:Suspend/Resume Test (Configuration Index 0) Suspended the parent port of the device Stopping Test [ Suspend/Resume Test (Configuration Index 0): Number of: Fails (0); Aborts (0); Warnings (0) ] Now Starting Test:Remote Wakeup Test (Configuration Index 0) The device does not support remote wakeup Stopping Test [ Remote Wakeup Test (Configuration Index 0): Number of: Fails (0); Aborts (0); Warnings (0) ] Now Starting Test:Remote Wakeup Test (Configuration Index 0) The device does not support remote wakeup Stopping Test [ Remote Wakeup Test (Configuration Index 0): Number of: Fails (0); Aborts (0); Warnings (0) ] Now Starting Test:Other Speed Configuration Test (Configuration Index 0 OtherSpeedConfiguration Index 0) Get configuration failed Number of interface descriptors found 1 Number of alternate interface descriptors found : 0 Number of endpoint descriptors found : 2 Configuration descriptor length : 9 Configuration descriptor type : 7 Configuration descriptor TotalLength : 20 Configuration descriptor NumInterfaces : 1 Configuration descriptor ConfigurationValue: 1 Configuration descriptor string descriptor index : 0 Configuration descriptor bmAttributes : c0 Device does not support remote wake up Maximum power device requires : 2mA Device is BUS/SELF-POWERED Stopping Test [ Other Speed Configuration Test (Configuration Index 0 OtherSpeedConfiguration Index 0): Number of: Fails (0); Aborts (0); Warnings (0) ] Now Starting Test:Interface Descriptor Test (Configuration Index 0 OtherSpeedConfiguration Index 0) Get configuration failed Bandwidth check passed Testing Interface number : 0 Alternate setting : 0 Interface descriptor length : 9 Interface descriptor bDescriptorType : 4 Interface descriptor bAlternateSetting : 0 Interface descriptor bNumEndPoints: 2 Interface descriptor bInterfaceClass reserved for assignment by the USB-IF : 8 Interface class code indicates [Mass-Storage] Interface Interface descriptor bInterfaceSubClass : 6 Interface descriptor bInterfaceProtocol assigned by the USB-IF : 50 Interface descriptor iInterface : 0x0 Stopping Test [ Interface Descriptor Test (Configuration Index 0 OtherSpeedConfiguration Index 0): Number of: Fails (0); Aborts (0); Warnings (0) ] Now Starting Test:Endpoint Descriptor Test (Configuration Index 0 OtherSpeedConfiguration Index 0) Get configuration failed Testing Interface number : 0 Alternate setting : 0 Endpoint descriptor length : 7 Endpoint descriptor type : 5 Endpoint Type : Bulk, Number : 1, Direction : IN Endpoint descriptor bmAttributes : 2 Endpoint descriptor raw MaxPacketSize : 200 Endpoint descriptor interval : 0 Illegal full speed bulk endpoint MaxPacketSize : 200 (1.2.80) A Full speed Bulk endpoint must have a MaxPacketSize of 0x08/0x10/0x20/0x40. Endpoint descriptor length : 7 Endpoint descriptor type : 5 Endpoint Type : Bulk, Number : 1, Direction : OUT Endpoint descriptor bmAttributes : 2 Endpoint descriptor raw MaxPacketSize : 200 Endpoint descriptor interval : 0 Illegal full speed bulk endpoint MaxPacketSize : 200 (1.2.80) A Full speed Bulk endpoint must have a MaxPacketSize of 0x08/0x10/0x20/0x40. Stopping Test [ Endpoint Descriptor Test (Configuration Index 0 OtherSpeedConfiguration Index 0): Number of: Fails (2); Aborts (0); Warnings (0) ] Now Starting Test:Device Qualifier Descriptor Test (Configuration Index 0) Get configuration failed Device qualifier length : a Device qualifier type : 6 Major version : 2 Minor version : 0 Device Qualifier device class : 0 Device qualifier device subclass : 0 Device qualifier device protocol : 0 Full speed device must have 8/16/32/64 bytes MaxPacketSize0 : 0 (1.2.8) The MaxPacketSize of a control endpoint must be one of 0x08/0x10/0x20/0x40 for a usb device operating at Full speed. Device qualifier bNumConfigurations : 1 Stopping Test [ Device Qualifier Descriptor Test (Configuration Index 0): Number of: Fails (1); Aborts (0); Warnings (0) ] Now Starting Test:Device Qualifier Descriptor Test (Configuration Index 0) Get configuration failed (1.1.2) Devices must support being set to Addressed/Configured state. Stopping Test [ Device Qualifier Descriptor Test (Configuration Index 0): Number of: Fails (1); Aborts (0); Warnings (0) ] Now Starting Test:Other Speed Configuration Test (Configuration Index 0 OtherSpeedConfiguration Index 0) Get configuration failed (1.1.2) Devices must support being set to Addressed/Configured state. Stopping Test [ Other Speed Configuration Test (Configuration Index 0 OtherSpeedConfiguration Index 0): Number of: Fails (1); Aborts (0); Warnings (0) ] Now Starting Test:Interface Descriptor Test (Configuration Index 0 OtherSpeedConfiguration Index 0) Get configuration failed (1.1.2) Devices must support being set to Addressed/Configured state. Stopping Test [ Interface Descriptor Test (Configuration Index 0 OtherSpeedConfiguration Index 0): Number of: Fails (1); Aborts (0); Warnings (0) ] Now Starting Test:Endpoint Descriptor Test (Configuration Index 0 OtherSpeedConfiguration Index 0) Get configuration failed (1.1.2) Devices must support being set to Addressed/Configured state. Stopping Test [ Endpoint Descriptor Test (Configuration Index 0 OtherSpeedConfiguration Index 0): Number of: Fails (1); Aborts (0); Warnings (0) ] Now Starting Test:Enumeration Test (repeat 150 times) Device speed is High User aborted test after 72 iterations. Stopping Test [ Enumeration Test (repeat 150 times): Number of: Fails (0); Aborts (1); Warnings (0) ] Summary Log Counts [ Fails (13); Aborts (2); Warnings (1) ]